← All tools/Tools/Garden & Outdoor/Deck Calculator
Deck Calculator
Boards, joists and screws for a rectangular deck — with a wastage allowance built in.
Boards needed
How it works
Deck area = length × width; one board covers board width × board length. Boards = ceil(deck area ÷ board coverage × 1.10) — the extra 10% covers cuts and wastage. Joists = floor(deck length ÷ joist spacing) + 1; screws = boards × joists × 2.
Deck area is length multiplied by width, in metres. One board covers its width multiplied by its length, so a 0.14 m wide, 4 m long board covers 0.56 m². Dividing the deck area by one board’s coverage gives the boards before wastage, and 10% is added for cuts and rejects, then rounded up. This calculator fixes waste at 10% — the usual allowance for a plain rectangular deck.
Joists run under the boards, and their count comes from the deck length divided by the joist spacing, rounded down, plus one for the joist at the far edge. Screws are two per board per joist — one near each edge of the board — so the screw count is boards multiplied by joists multiplied by two. The price field is optional: enter a price per board and the calculator adds an estimated board cost. Enter board width and joist spacing in centimetres and lengths in metres — mixing the two is the most common way to get a silly answer.
Worked example: a 4 × 3 m deck is 12 m². A board 0.14 m wide and 3 m long covers 0.42 m², so 12 ÷ 0.42 = 28.6 boards, and with 10% wastage ceil(28.6 × 1.10) = 32 boards. Joists at 40 cm spacing along the 4 m length: floor(4 ÷ 0.4) + 1 = 11 joists. Screws: 32 × 11 × 2 = 704.
Second worked example: a 5 m × 4 m deck is 20 m². A board 0.14 m wide and 4 m long covers 0.56 m², so 20 ÷ 0.56 = 35.71 boards before wastage, and with 10% wastage that rounds up to 40 boards. Joists at 40 cm spacing along the 5 m length: 5 ÷ 0.4 = 12.5, rounded down to 12, plus 1 = 13 joists. Screws: 40 × 13 × 2 = 1,040. At ₹450 a board, the boards cost 40 × ₹450 = ₹18,000.
How to choose your numbers
Joist spacing is the decision that drives everything else. Forty centimetres is standard for a home deck, and it suits most boards. Go to 30 cm for thin boards or a deck that will carry heavy pots and furniture — the extra joists cost little, and a bouncy deck is hard to fix later. Sixty centimetres suits only thick boards on a light-use deck, and it saves joists at the price of a springier feel underfoot. If your deck is wider than your boards are long, the boards will need joints — plan where they fall so they land on a joist, not between two.
The screw count is where small choices multiply. Each extra joist adds two screws per board, so on a 40-board deck one more joist means 80 more screws — keep a box spare. And remember the estimate covers boards, joists and screws only: posts, beams, footings and the finish are separate, and on a raised deck they can cost as much as the boards. In Indian conditions, also budget for treatment against rain and termites, which the board price rarely includes.
Price the boards per piece, not per square foot, when you compare suppliers — a cheaper board that is shorter can cost more once the count is done.
Frequently asked questions
Why add 10% extra boards?
Boards are cut to length and some are rejected for knots or warping. 10% is the usual wastage allowance; use 15% for diagonal or patterned layouts.
Which way do the boards run?
This calculator assumes boards run along the deck width (their length spans the width) and joists run along the length. Flip the deck’s length and width if your boards run the other way.
What joist spacing should I use?
40 cm is standard for residential decks. Use 30 cm for thinner boards or heavy loads, and 60 cm only for thick boards on a light-use deck.
How many screws per board?
Two screws where each board crosses each joist — one near each edge — which is why the count is boards × joists × 2.
Does this include posts and footings?
No — this covers the decking surface, joists and screws only. Posts, beams and footings depend on the deck height and ground, and need a separate estimate.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.