← All tools/Tools/Garden & Outdoor/Artificial Turf Calculator

Artificial Turf Calculator

Work out how much artificial turf, infill and base material your lawn needs, before you order.

ft
ft
ft
%
lb/sq ft
in

Roll length to buy

34 ft

510 sq ft of turf · 2 strips

Lawn area
384 sq ft
Turf to buy
510 sq ft
Breakdown
Lawn area384 sq ft
Strips needed2
Seams1
Roll length (with waste)34 ft
Turf area to buy510 sq ft
Infill needed768 lb
Infill bags (50 lb)16 bags
Base material6.40 tons

How it works

Area = lawn length × lawn width
Strips = ceil(lawn length ÷ roll width), running along the lawn width
Seams = strips − 1
Roll length = ceil(strips × lawn width × (1 + waste%))
Turf to buy = roll length × roll width
Infill (lb) = area × infill rate
Infill bags = ceil(infill ÷ 50 lb)
Base (tons) = area × base depth (ft) × 100 lb/cu ft ÷ 2000

A 24 × 16 ft lawn (384 sq ft) with a 15 ft roll and 5% waste needs 2 strips, each 16 ft long: 32 ft, plus 5% = 33.6 ft, rounded up to 34 ft of turf (510 sq ft bought). Infill is 384 × 2 = 768 lb, or 16 × 50 lb bags, and a 4 in base needs 384 × (4 ÷ 12) × 100 ÷ 2000 = 6.4 tons.

Frequently asked questions

How many strips of turf do I need?

Divide the lawn length by the roll width and round up. A 24 ft lawn with a 15 ft roll needs 2 strips, and the strips run along the lawn width, so each strip is as long as the lawn is wide.

What is the waste allowance for?

Cutting, trimming around edges and matching the pile direction always uses extra turf. 5% is a fair allowance for a plain rectangle; allow 10% for curved edges or awkward shapes.

How much infill does artificial turf need?

About 1–2 lb per sq ft is typical for a garden lawn, depending on the pile height. This calculator uses your rate, so a 384 sq ft lawn at 2 lb per sq ft needs 768 lb of infill.

How deep should the base be under artificial turf?

A compacted aggregate base of 3–4 in is standard for a garden lawn. Deeper bases suit heavy foot traffic or soft ground, and the tonnage rises in proportion to the depth.

Do I count the seams?

Yes — every join between two strips is a seam, so seams = strips − 1. Seams need joining tape and adhesive, and keeping them to a minimum gives a neater finish.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.