← All tools/Tools/Garden & Outdoor/Pond Volume Calculator
Pond Volume Calculator
How much water your pond holds — from length, width and average depth, for rectangular or oval ponds.
Estimate only — the actual volume varies with the pond’s true shape and average depth, so measure the depth in several places and average it.
Pond volume
Volume breakdown
How it works
Rectangular pond: volume = length × width × average depth. Oval pond: volume = length × width × average depth × 0.785 (the area of an ellipse is π ÷ 4 ≈ 0.785 of the rectangle around it). Litres = cubic metres × 1,000. Pump sizing hint: a pond pump should move the full volume every 1–2 hours, so the pump flow is roughly half the volume to the full volume, in litres per hour.
Worked example: a rectangular pond 3 m long, 2 m wide and 1 m deep holds 3 × 2 × 1 = 6 cubic metres, or 6,000 litres. The same pond as an oval holds 6 × 0.785 = 4.71 cubic metres, or 4,710 litres. A pump for the 6,000-litre pond should move about 3,000 to 6,000 litres an hour. A rectangular pond 4 m × 3 m × 1.5 m holds 18 cubic metres, or 18,000 litres — 14.13 cubic metres (14,130 litres) as an oval.
Frequently asked questions
Why average depth, not the deepest point?
Because most ponds slope — deep in the middle, shallow at the edges. Using the deepest point overstates the volume. Measure the depth in several places, add them up and divide by the number of measurements.
What does the 0.785 do for an oval pond?
An oval (ellipse) covers about 78.5% of the rectangle drawn around it — that is π ÷ 4. So an oval pond holds 0.785 times the volume of a rectangular pond with the same length, width and depth.
How big a pump do I need?
As a rule of thumb, the pump should turn over the whole pond every 1–2 hours. For a 6,000-litre pond that means a pump rated 3,000–6,000 litres an hour. If you keep fish, aim for the faster end and size the filter to match.
How much water treatment do I need?
Treatments, fish stocking and plant quantities are all dosed by volume, so this number is the starting point — always work from litres, and round the dose up rather than down when the pond is between sizes.
What if my pond is an irregular shape?
Split it into rectangles and ovals, work out each part with this calculator, and add them together. For a rough free-form pond, use the oval figure — it is usually closer than the rectangular one.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.