← All tools/Tools/Garden & Outdoor/Sprinkler Calculator

Sprinkler Calculator

How many sprinklers your lawn needs, how many zones, and how long to run them.

sq ft
sq ft
GPM
GPM
in

Sprinkler heads needed

—

Heads
10 heads
Run / zone
31 min
Heads bar scaled to 20; run-time bar scaled to 60 minutes per zone
Watering plan

How it works

Heads needed = lawn area ÷ coverage per head, rounded up.
Heads per zone = available flow ÷ flow per head, rounded down — a zone cannot use more water than the supply gives.
Zones = heads ÷ heads per zone, rounded up.
Water needed = area × depth × 0.623 gallons (1 inch of water over 1 sq ft is 0.623 gallons).
Run time per zone = (water ÷ zones) ÷ (heads per zone × flow per head).
Water the lawn in zones, one after another — the total run time is the per-zone time × the number of zones.

The calculator works in three steps, all in imperial units: square feet for area, gallons per minute (GPM) for flow, and inches for water depth. First, heads needed is the lawn area divided by the coverage of one head, rounded up — a head that covers 100 sq ft cannot water a fraction of itself. Second, heads per zone is the available flow divided by the flow of one head, rounded down, because a zone cannot use more water than the supply gives; the number of zones is then heads divided by heads per zone, rounded up. Third, water needed is area × depth × 0.623, since one inch of water over one square foot is 0.623 gallons. Run time per zone is the zone’s share of that water divided by the zone’s total flow, and the whole lawn takes the per-zone time multiplied by the number of zones, because zones run one after another, not together.

Worked example: a 1,000 sq ft lawn with heads covering 100 sq ft each needs 10 heads. At 2 GPM per head and 10 GPM available, each zone holds 5 heads, so the lawn needs 2 zones. One inch of water over 1,000 sq ft is 623 gallons, and each zone delivers 10 GPM — so each zone runs 311.5 ÷ 10 = about 31 minutes. A 500 sq ft lawn needs 5 heads and 1 zone, with the same 31 minutes per zone. Halve the depth to half an inch and the run time halves to about 16 minutes.

Second worked example: a 2,000 sq ft lawn in a Bengaluru villa, with heads covering 150 sq ft each at 2 GPM, a 12 GPM supply, and 1 inch of water. Heads needed: 2,000 ÷ 150 = 13.33, rounded up to 14. Each zone holds 12 ÷ 2 = 6 heads, so the lawn needs 14 ÷ 6 = 2.33, rounded up to 3 zones. Water needed: 2,000 × 1 × 0.623 = 1,246 gallons, or about 415 gallons per zone. Each zone delivers 6 × 2 = 12 GPM, so it runs 415 ÷ 12 = about 35 minutes — and the whole lawn takes 3 × 35 minutes = 1 h 44 min.

Frequently asked questions

How much water does a lawn need?

About 1 inch a week in the growing season, including rain — roughly 0.623 gallons per sq ft. Water deeply and less often (2–3 times a week) rather than a little every day, so roots grow down.

Why split the lawn into zones?

Because a water supply can only feed so many heads at once. If you run 10 heads on a 10 GPM supply, each head gets half its flow and the spray collapses. Zones keep the pressure right.

What time of day should I water?

Early morning — before 10 am. Less water evaporates, and the grass dries before night, which keeps fungal disease down. Avoid watering in the heat of the day or late at night.

What if my heads overlap?

Overlap is good: heads should spray to the next head (head-to-head coverage), so the lawn gets even water. This calculator counts coverage per head, so it already allows for normal overlap — it does not add extra heads for it.

Can I use this for drip irrigation?

No — drip systems water by the emitter, not by area coverage, and they run far longer at much lower flows. This calculator is for spray and rotor sprinklers on lawns.

Common mistakes

The classic mistake is putting too many heads on one zone: run 10 heads on a 10 GPM supply and each head gets half its flow, so the spray collapses and the far corners stay dry — zones exist to keep the pressure right, not to save time. Second, watering a little every day: shallow daily watering grows shallow roots, and the lawn then needs water constantly; one deep soak of about an inch, two or three times a week, grows roots down where the soil stays damp. Third, watering at noon or late at night — midday sun evaporates much of it, and wet grass overnight invites fungal disease, so early morning is the right slot. Finally, ignoring overlap: heads are meant to spray to the next head, so a lawn that looks patchy usually needs the heads re-aimed, not more heads.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.