← All tools/Tools/Garden & Outdoor/Grass Seed Calculator
Grass Seed Calculator
Find how much grass seed a lawn needs, in kilograms and bags.
Seed needed
How it works
grams = area × rate in grams per square metre kilograms = grams ÷ 1000 bags = kilograms ÷ 5, rounded up
The formula is three short steps. First, multiply the lawn area in square metres by the sowing rate in grams per square metre — that gives the total seed in grams. The default rate of 25 g/m² sits mid-range on most packets (20–35 g/m² for a new lawn); overseeding needs about half that. Second, divide by 1,000 to turn grams into kilograms. Third, divide by 5 and round up, because seed is sold in 5 kg bags and you cannot buy part of a bag — so 2.5 kg and 5 kg both mean one bag, while 5.1 kg means two. The formula assumes a flat, open lawn measured in square metres. It does not allow for paths, beds or trees inside the area, so measure the grassed area only, or subtract the non-grass parts first.
Worked example: 100 m² × 25 g/m² = 2500 g = 2.5 kg, which is 1 bag of 5 kg when rounded up.
Second worked example: a 60 m² lawn in a Hyderabad housing society, sown at 30 g/m² for a thicker new lawn. That is 60 × 30 = 1,800 g = 1.8 kg of seed, which is 1 bag of 5 kg when rounded up. At the default 25 g/m² the same lawn would need 1.5 kg — still 1 bag, so the thicker rate costs nothing extra here.
Frequently asked questions
How much seed do I need per square metre?
Most lawn seed packets suggest 20 to 35 grams per square metre for a new lawn. This calculator defaults to 25 grams.
Should I buy extra seed?
Buying one extra bag covers thin patches and overseeding later in the season.
Does the rate change for overseeding?
Yes, overseeding an existing lawn usually needs about half the new-lawn rate, so check your packet.
What if my lawn is not a rectangle?
Split it into rectangles and triangles, work out each area, and add them together. For a roughly rectangular lawn with a curved edge, measure the longest length and the widest width and use those — you will overestimate slightly, which is safer than running short. Paths, flower beds and trees inside the lawn do not need seed, so measure around them or subtract their area before you enter a number.
Does the type of grass change the rate?
Yes — fine lawn grasses such as Bermuda and fine fescue are usually sown at 20–25 g/m², while coarser or shade-tolerant mixes can ask for 30–35 g/m². Always check the rate printed on your own packet and enter that instead of the default. The calculator’s bag size stays 5 kg either way, so a different rate changes the kilograms but often not the number of bags.
Common mistakes
The most expensive mistake is measuring the plot instead of the lawn: a 100 m² plot with a house, driveway and beds on it may hold only 40 m² of grass, and buying seed for the whole plot wastes half the bag. Measure the grassed area only, in metres, and walk it with a tape rather than guessing. The second mistake is sowing too thin to save money — bare patches invite weeds, and overseeding later costs more than sowing properly once. The third is forgetting the edges: seed scattered along a boundary lands on paths and dies, so add a small margin, about 5–10%, for edging losses and thin spots. Finally, do not store an opened bag for next year and expect the same germination; seed kept through a hot Indian summer loses vigour, so buy fresh and sow within the season.
More tools
Grass Seed Calculator guides
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.