Grass Seed Calculator — the complete guide
Grass seed is sold by weight, spread by area and bought by the bag, so one job needs three numbers that all describe the same sowing. This guide covers every part of the Grass Seed Calculator: the two inputs, the three-step maths, the common rates for new lawns, overseeding and hard-wearing lawns, and how to tell whether one bag is enough.
At a glance
The two inputs
The lawn area is the size of the ground to sow, in square metres, found by multiplying length by width. The seeding rate is how much seed lands on each square metre, in grams per square metre, taken from the seed packet. The tool starts at 100 square metres and 25 grams per square metre, which gives 2.5 kilograms and 1 bag, a typical small-to-medium lawn.
The three-step maths
Grams are area times rate. Kilograms are grams divided by 1,000. Bags are kilograms divided by 5, rounded up. For the tool’s starting values, 100 square metres at 25 grams per square metre, that is 2,500 grams, 2.5 kilograms and 1 bag. Each step feeds the next, so a mistake in the area carries through to the bags.
How the rate changes the answer
The rate is the lever that moves the answer most for a fixed lawn, because it multiplies the whole area. For a 100-square-metre lawn, 20 grams per square metre needs 100 × 20 = 2,000 grams, which is 2 kilograms and 1 bag; 25 grams needs 2.5 kilograms and 1 bag; and 35 grams needs 100 × 35 = 3,500 grams, which is 3.5 kilograms and still 1 bag. All three rates fit in one bag, because none passes 5 kilograms.
Common jobs and their rates
A new lawn usually takes 20 to 35 grams per square metre, with 25 as a good middle value. Overseeding an existing lawn takes about half that, around 12.5 grams: a 60-square-metre lawn overseeded at 12.5 grams needs 60 × 12.5 = 750 grams, which is 0.75 kilograms and 1 bag. A hard-wearing family lawn takes the top end, 30 to 35 grams: a 120-square-metre lawn at 30 grams needs 120 × 30 = 3,600 grams, which is 3.6 kilograms and 1 bag.
When does the bag count change?
The bag count changes only when the weight crosses a multiple of 5 kilograms. A lawn needing 5 kilograms exactly is 1 bag, while a lawn needing 5.25 kilograms is 2 bags. A lawn of 200 square metres at 25 grams per square metre needs exactly 5 kilograms and 1 bag; a lawn of 200 square metres at 30 grams needs 200 × 30 = 6,000 grams, which is 6 kilograms and 2 bags. That step is why the tool rounds up rather than to the nearest bag.
The common mistake
People measure the lawn carefully and then guess the rate, or use the rate for a different seed type. Guessing 35 grams when the packet says 20 grams buys 75 percent more seed than the lawn needs: for a 100-square-metre lawn, that is 3.5 kilograms instead of 2 kilograms. Read the rate off the packet you actually bought, and type that number in.
Frequently asked questions
What rates do common grass seed jobs need?
A new lawn usually takes 20 to 35 g/m², overseeding takes about half that, around 12.5 g/m², and a hard-wearing lawn takes 30 to 35 g/m².
How much seed does a 100 m² lawn at 20 g/m² need?
2 kilograms, which is 1 bag of 5 kg.
How much seed does a 100 m² lawn at 35 g/m² need?
3.5 kilograms, which is 1 bag of 5 kg.
How much seed does a 200 m² lawn at 30 g/m² need?
6 kilograms, which is 2 bags of 5 kg.
When does the bag count go up?
When the weight passes a multiple of 5 kg. Exactly 5 kg is 1 bag, while 5.25 kg is 2 bags.
More guides on the Grass Seed Calculator
- How to use the Grass Seed Calculator — step by step
- Grass Seed Calculator explained with worked examples
- Grass Seed Calculator formula — how it actually works
- Grass Seed Calculator for beginners — start here
- Common mistakes people make with the Grass Seed Calculator
- Grass Seed Calculator vs doing it by hand — which is faster
- How to get an accurate result from the Grass Seed Calculator
- Grass Seed Calculator for students — with examples
- Grass Seed Calculator for homeowners and DIYers
Try the Grass Seed Calculator — free, in your browser.