← All blog posts

Grass Seed Calculator for beginners — start here

WhiteUI · A plain-English guide to the Grass Seed Calculator

If you have never sown a lawn before, the only idea you need is that seed is spread evenly: a set weight of seed on every square metre, added up over the whole lawn. The Grass Seed Calculator does the adding up for you, but knowing what the three answers mean — grams, kilograms and bags — is what stops you buying far too much seed, or far too little.

At a glance

Beginner example: 60 m² × 25 g/m² = 1.5 kg1.5 kg seedOut of one 5 kg bag1.5 kg = 1 bag of 5 kg
A small lawn of 60 square metres at 25 grams per square metre needs 1.5 kilograms of seed, 30 percent of one 5 kilogram bag.

Start with the three units

The lawn area is measured in square metres, written m². The seeding rate is measured in grams per square metre, written g/m², which is how much seed lands on each square metre. The answer is measured in kilograms, where 1 kilogram is 1,000 grams, and in bags, where each bag holds 5 kilograms. One bag therefore covers 200 square metres at the standard rate of 25 grams per square metre, because 5,000 ÷ 25 = 200.

Your first example: 60 m² at 25 g/m²

The grams are 60 × 25 = 1,500. The kilograms are 1,500 ÷ 1,000 = 1.5. The bags are 1.5 ÷ 5 = 0.3, rounded up to 1 bag. Try it on the tool and check that your answers match: 1.5 kilograms, 1 bag. The bag will feel less than a third full when you have finished, because 3.5 kilograms are left over for patching later.

Your second example: a higher rate, 40 m² at 35 g/m²

The grams are 40 × 35 = 1,400, the kilograms are 1,400 ÷ 1,000 = 1.4, and the bags are 1.4 ÷ 5 = 0.28, rounded up to 1 bag. Notice that this lawn is smaller than the first but sown more thickly, and still needs only 1 bag. Any lawn needing up to 5 kilograms needs one bag, so the bag count stays at 1 until the weight passes 5 kilograms.

Measuring the lawn

Pace the lawn out or use a tape measure, then multiply length by width. A lawn 8 metres long and 7.5 metres wide is 8 × 7.5 = 60 square metres, the same as the first example. If the lawn is L-shaped, split it into two rectangles, work out each area, and add them: a 40-square-metre part plus a 20-square-metre part is 60 square metres.

Choosing the rate

Start with the rate on your seed packet. Most packets suggest 20 to 35 grams per square metre for a new lawn, and the tool starts at 25 grams, which is a safe middle value. Use a lower rate for overseeding an existing lawn, about half the new-lawn rate, and a higher rate for a lawn that will take heavy wear from children or pets.

The common mistake

Beginners often type the length and width into the area box instead of multiplying them first. Typing 10 for a lawn that is 10 metres by 10 metres gives 10 × 25 = 250 grams, or 0.25 kilograms, when the real lawn is 100 square metres and needs 2.5 kilograms. Multiply length by width first, then type the area in.

Frequently asked questions

How much lawn does one 5 kg bag of seed cover?

200 square metres at 25 g/m², because 5,000 ÷ 25 = 200.

How much seed does a 60 m² lawn at 25 g/m² need?

1.5 kilograms, which is 1 bag of 5 kg.

How much seed does a 40 m² lawn at 35 g/m² need?

1.4 kilograms, which is 1 bag of 5 kg.

What seeding rate should a beginner use?

25 grams per square metre is a safe middle value. Most packets suggest 20 to 35 grams, so check your own packet first.

More guides on the Grass Seed Calculator

Try it yourself

Try the Grass Seed Calculator — free, in your browser.

Open the Grass Seed Calculator