← All blog posts

Reading Time: worked example step by step

WhiteUI · A plain-English guide to the Reading Time Calculator

The fastest way to learn a reading time calculation is to watch one happen slowly. This post works through a single example step by step — an 84,000-word book at 200 words a minute — and then runs the same book at slower and faster speeds, so you can follow each line and copy the method for your own numbers. Both examples use the same formulas the Reading Time Calculator uses: minutes = words ÷ words per minute, and hours = minutes ÷ 60.

A worked example in four steps: eighty-four thousand words divided by two hundred words a minute is four hundred twenty minutes, which is seven hours
Four steps: write down the words, divide by your speed, turn minutes into hours, and check the answer.

The problem

You have an 84,000-word book — a solid novel, about 336 pages at 250 words a page — and you read at 200 words a minute. How long will it take to read? That is the whole problem: two numbers, 84,000 and 200, and the answer is one time. Expect something in hours, not minutes: 84,000 words is a lot of words, and even a fast reader will need most of a working day. The steps below take it slowly, one line at a time.

Step 1: write down the word count

The word count is 84,000. Write it down first, before any arithmetic, because it is the number every other step refers back to. If you only know the pages, work it out first: 336 pages × 250 words a page = 84,000 words. Check the number is words, not pages — typing 336 into the calculator instead of 84,000 would give an answer of under two minutes, which is plainly wrong for a whole book.

Step 2: divide by the speed

Divide the word count by your reading speed: 84,000 ÷ 200 = 420 minutes. That is the reading time in minutes. The division is the heart of the calculation, and it is the only hard step: everything after it is tidying the answer. As a sense check, 420 minutes is 7 hours, which feels right for a novel — not 7 minutes, and not 70 hours. If your answer is far from that range, check the speed first: a speed typed as 20 instead of 200 would give 4,200 minutes, or 70 hours.

Step 3: turn minutes into hours

Divide the minutes by 60 to get hours: 420 ÷ 60 = 7 hours exactly. No remainder this time, so the answer is a clean 7 hours. Written out in full: 84,000 ÷ 200 = 420 minutes, and 420 ÷ 60 = 7 hours. That is the answer: 7 hours of reading, not counting breaks.

84,000 ÷ 200 = 420 minutes
420 ÷ 60 = 7 hours

Step 4: the same book at other speeds

Now run the same book at other speeds. At 150 words a minute — dense material, or a tired evening — it takes 84,000 ÷ 150 = 560 minutes, which is 9 hours and 20 minutes. At 250 words a minute it takes 84,000 ÷ 250 = 336 minutes, which is 5 hours and 36 minutes. The book never changes; the speed decides the time, and the gap between the slowest and fastest reader is nearly 4 hours on the same book.

Turning 7 hours into a reading plan

Seven hours is a plan, not just a number. Read an hour a day and the book takes 7 days. Read 30 pages a day and it takes 336 ÷ 30 = 11.2 days, so about 12 days in practice, since the last day is a short one. Read for 2 hours each evening and it takes 3 and a half evenings. Pick the pace that fits your week, and the arithmetic tells you the finish date.

Checking your answer

Three checks catch most slips. First, multiply the time back by the speed: 420 minutes × 200 words a minute should come out close to the 84,000 words you started with. Second, turn the hours into pages: 7 hours at 200 words a minute is 84,000 words, which is 336 pages at 250 words a page — the book you started with. Third, the time should feel right for the length: a novel in 7 hours is a steady pace, not a sprint.

Frequently asked questions

How long does an 84,000-word book take to read?

At 200 words a minute, 7 hours: 84,000 ÷ 200 = 420 minutes. At 150 words a minute it takes 9 hours and 20 minutes, and at 250 words a minute it takes 5 hours and 36 minutes.

How many pages is 84,000 words?

About 336 pages at 250 words a page. At 30 pages a day, the book takes 336 ÷ 30 = 11.2 days, so about 12 days in practice.

How do I check a worked example?

Multiply the time back by the speed: 420 minutes × 200 words a minute should come out close to the 84,000 words you started with.

Why does the same book take different times for different readers?

Because the speed decides the time. The word count never changes, but a reader at 150 words a minute needs 9 hours and 20 minutes for a book a 250-word-a-minute reader finishes in 5 hours and 36 minutes.

More guides on the Reading Time Calculator

Try it yourself

Try the Reading Time Calculator — free, in your browser.

Open the Reading Time Calculator