Reading Time quick reference table
Keep this table nearby and you will rarely need to calculate. It lists the reading time for common word counts at three speeds — 150, 200 and 250 words a minute — the combinations that all take exactly one hour, and the totals that usually mean an article, a chapter or a novel. The Reading Time Calculator will give you the same numbers for any combination, including the ones between the rows.
The table
Read the table across for one word count, or down one column for one speed. All times are pure reading time, without breaks. The 200 column is the one to use for ordinary prose; the 150 column is for dense or technical writing, and the 250 column is for light reading.
| Words | 150 wpm | 200 wpm | 250 wpm |
|---|---|---|---|
| 10,000 | 1 h 7 min | 50 min | 40 min |
| 25,000 | 2 h 47 min | 2 h 5 min | 1 h 40 min |
| 50,000 | 5 h 33 min | 4 h 10 min | 3 h 20 min |
| 100,000 | 11 h 7 min | 8 h 20 min | 6 h 40 min |
| 200,000 | 22 h 13 min | 16 h 40 min | 13 h 20 min |
Read the table top to bottom and the pattern is plain: a bigger word count means a longer time, and a faster speed means a shorter one.
How to read the table
Start with the word count column and the 200 column together: they are the two you will use most. Ten thousand words is about 50 minutes, 25,000 words is about 2 hours and 5 minutes, 50,000 words is about 4 hours and 10 minutes, 100,000 words is about 8 hours and 20 minutes, and 200,000 words is about 16 hours and 40 minutes. Then check the 150 and 250 columns when the text is denser or lighter than usual: the same 100,000 words take 11 hours and 7 minutes at 150 words a minute, and 6 hours and 40 minutes at 250.
The one-hour combinations
Some combinations all take exactly one hour, and they are handy when you are planning a reading session. Twelve thousand words at 200 words a minute is 1 hour. Fifteen thousand words at 250 is 1 hour. Nine thousand words at 150 is 1 hour. If you have an hour to read, pick the combination that matches your speed and you will know how far you will get — or, working backwards, if you have 12,000 words to read and an hour to do it in, you need to read at 200 words a minute.
Milestones to aim for
Some totals have a meaning of their own. Around 800 words is a news article: 4 minutes at 200 words a minute. Around 12,000 words is a textbook chapter: 1 hour at 200, or 1 hour and 20 minutes at 150. Around 80,000 words is a novel: 6 hours and 40 minutes at 200. Around 40,000 words is a thesis chapter or a long report: 3 hours and 20 minutes at 200. These are rough guides, not guarantees, but they give you a place to start when you are sizing up a pile of reading.
Values between the rows
Real texts rarely land on a table row. A 30,000-word report at 200 words a minute is 2 hours and 30 minutes. A 45,000-word book at 225 words a minute is 3 hours and 20 minutes. A 90,000-word book at 200 words a minute is 7 hours and 30 minutes. The rule is always the same: divide the words by the speed, then divide the minutes by 60. The table gives you the round numbers; the calculator fills in the rest.
Using the table to check an answer
The table is also a fast way to catch a wrong answer. If your calculation says 100,000 words at 200 words a minute take 500 hours, the table says otherwise: the row reads 8 hours and 20 minutes, so the minutes were called hours. If your answer says 10,000 words take 5 minutes, the table says 50 minutes, so a zero went missing from the word count. Check the row first, then the maths: a table lookup takes seconds, and it catches the two mistakes that cost the most time — wrong units and wrong word counts.
Frequently asked questions
How long does it take to read 100,000 words?
At 200 words a minute, 8 hours and 20 minutes. At 150 words a minute it takes 11 hours and 7 minutes, and at 250 words a minute it takes 6 hours and 40 minutes.
How many words can I read in one hour?
At 200 words a minute, 12,000 words. At 250 words a minute, 15,000 words. At 150 words a minute, 9,000 words.
How long does it take to read 10,000 words?
At 200 words a minute, 50 minutes. At 150 words a minute it takes 1 hour and 7 minutes, and at 250 words a minute it takes 40 minutes.
What if my word count is not in the table?
Use the same rule: divide the words by the speed, then divide the minutes by 60. A 30,000-word report at 200 words a minute is 2 hours and 30 minutes.
More guides on the Reading Time Calculator
- How to calculate reading time
- Reading Time formula explained simply
- Reading Time: worked example step by step
- Reading Time for beginners
- Common mistakes when calculating reading time
- Reading Time vs words per minute: what's the difference
- How to use a reading time calculator
- Reading Time in real life: everyday examples
- Reading Time practice questions with answers
Try the Reading Time Calculator — free, in your browser.