← All blog posts

Reading Time formula explained simply

WhiteUI · A plain-English guide to the Reading Time Calculator

The reading time formula is one line long, and every part of it does a job. Written out, it is minutes = words ÷ words per minute, and then hours = minutes ÷ 60. It turns two numbers you can find in a minute — how many words the text has, and how fast you read — into a time you can plan around. This guide takes the formula apart piece by piece, so each part makes sense before you use it. The Reading Time Calculator uses the same formula, and you can check any of its answers with the steps here.

The reading time formula in three pieces: words, divided by words per minute, equals minutes, and minutes divided by sixty equals hours
Three pieces: the word count, your speed, and 60 minutes in an hour.

Piece 1: the word count

The word count is the size of the job. It is the number of words in the text, and it is the only number that describes the text itself. Most word processors show it at the bottom of the screen. If you only know the pages, multiply the pages by the words on a page: at 250 words a page, a 240-page book is 60,000 words, and a 180-page book is 45,000 words. A bigger word count always means a longer reading time, in exact proportion: double the words and the time doubles too. That is why the word count sits on top of the division — it is the amount of work, and the speed below it is how fast the work gets done.

Piece 2: words per minute

Words per minute is your reading speed, and it is the number that describes you, not the text. An average adult reads about 200 to 250 words a minute for ordinary prose. Dense or technical writing is slower, closer to 150, and light fiction can be faster, toward 300. The speed sits underneath the division, so a bigger speed means a smaller time: read twice as fast and the same text takes half as long. To measure your own speed, time yourself reading a passage of known length for one minute and count the words you covered. If you have never measured it, start with 200 — it is the middle of the average range, and it is the speed the calculator opens with.

Piece 3: minutes into hours

The division gives you minutes, and minutes are fine for short texts: a 3,000-word essay at 200 words a minute takes 15 minutes, and nobody needs that in hours. But once the number passes 60, hours are friendlier. Divide the minutes by 60: 300 minutes becomes 5 hours, and 200 minutes becomes 3 hours and 20 minutes, because 200 ÷ 60 is 3 with 20 left over. The 60 is not a guess — it is the number of minutes in an hour, and it never changes.

minutes = words ÷ words per minute
hours = minutes ÷ 60

Putting it together: 45,000 words at 225 words a minute

Run one full calculation with the pieces in place. A 45,000-word book — 180 pages at 250 words a page — read at 225 words a minute. First, the minutes: 45,000 ÷ 225 = 200 minutes. Then the hours: 200 ÷ 60 = 3 hours and 20 minutes. That is the answer. Read the same book more slowly, at 150 words a minute, and it takes 45,000 ÷ 150 = 300 minutes, or 5 hours. Read it faster, at 300 words a minute, and it takes 45,000 ÷ 300 = 150 minutes, or 2 hours and 30 minutes. The same book, three speeds, three times — and the formula is the same in each case.

Why the answer changes with speed

The speed is the only part of the formula you can change without changing the book, and it is the lever that moves the answer most. Going from 150 to 300 words a minute halves the time, from 5 hours to 2 hours and 30 minutes on the 45,000-word book. But the gains shrink as you get faster: going from 200 to 250 saves an hour on a 60,000-word text, while going from 250 to 300 saves only 40 minutes. That is the shape of division: each extra word per minute is worth less than the one before it.

Frequently asked questions

What is the reading time formula?

Minutes = words ÷ words per minute, then hours = minutes ÷ 60. Divide the word count by your reading speed to get minutes, then divide the minutes by 60 to get hours.

How long does a 45,000-word book take to read?

At 225 words a minute, 3 hours and 20 minutes: 45,000 ÷ 225 = 200 minutes. At 150 words a minute it takes 5 hours, and at 300 words a minute it takes 2 hours and 30 minutes.

Why is the speed underneath the division?

Because a bigger speed means a smaller time. Read twice as fast and the same text takes half as long — the speed divides the work, so it sits below the line.

What happens if I use the wrong speed?

The answer moves with it. Using 200 words a minute for a dense 60,000-word textbook gives 5 hours, but the honest answer at 150 words a minute is 6 hours and 40 minutes.

More guides on the Reading Time Calculator

Try it yourself

Try the Reading Time Calculator — free, in your browser.

Open the Reading Time Calculator