How to calculate reading time
Reading time answers one plain question: how long will this take me to read? The answer comes from two numbers you already know or can find in a minute: how many words the text has, and how fast you read. Divide the first by the second and you get the reading time in minutes; divide that by 60 and you get it in hours. The Reading Time Calculator does the same sum, and this guide shows the working so you can check any answer by hand, and work one out on paper when there is no calculator nearby.
The two numbers you need
First, the word count. Most word processors show it at the bottom of the screen, next to the page count. If you only know the pages, multiply by the words on a page: a typical paperback page holds about 250 to 300 words, and the calculator on this site uses 250, so a 240-page book is about 60,000 words. Second, your reading speed, in words per minute. An average adult reads about 200 to 250 words a minute for ordinary prose. Dense or technical writing is slower, closer to 150. If you have never measured your own speed, start with 200 — it is the middle of the range, and it is the speed the calculator opens with.
Step 1: divide the words by your speed
Take the word count and divide it by your reading speed. The answer is the reading time in minutes. For a 60,000-word text at 200 words a minute, that is 60,000 ÷ 200 = 300 minutes. The division is the whole calculation: every other step is just tidying the answer into a friendlier shape. If the text is shorter, the same step still works. A 12,000-word article at 200 words a minute takes 12,000 ÷ 200 = 60 minutes, and a 30,000-word report takes 30,000 ÷ 200 = 150 minutes. The speed stays the same; only the word count changes.
Step 2: turn minutes into hours
Three hundred minutes is a correct answer, but it is not a friendly one. Nobody plans their evening in minutes once the number passes an hour. Divide the minutes by 60 to get hours: 300 ÷ 60 = 5 hours. If the minutes do not divide evenly, keep the remainder as minutes: 400 minutes is 6 hours and 40 minutes, because 400 ÷ 60 is 6 with 40 left over.
minutes = words ÷ words per minute hours = minutes ÷ 60
Worked example: 5 hours for 60,000 words
Put the steps together with one full example. The text is 60,000 words long — a short novel, or a long report — and you read at 200 words a minute. First, divide: 60,000 ÷ 200 = 300 minutes. Next, turn the minutes into hours: 300 ÷ 60 = 5 hours. That is the answer: 5 hours of reading. Read the same text more slowly, at 150 words a minute, and it takes 60,000 ÷ 150 = 400 minutes, which is 6 hours and 40 minutes. Read it faster, at 250 words a minute, and it takes 60,000 ÷ 250 = 240 minutes, which is 4 hours. The words never change; the speed decides the time.
A second example to try
Try a different set of numbers to see the pattern hold. A 90,000-word book at 200 words a minute takes 90,000 ÷ 200 = 450 minutes, which is 7 hours and 30 minutes. The same book at 250 words a minute takes 360 minutes, or 6 hours. The method never changes: words divided by speed, then minutes divided by 60.
Check your answer before you trust it
Two quick checks catch most slips. First, multiply the answer back by the speed: 300 minutes × 200 words a minute should come out close to the 60,000 words you started with, and if it comes out near 300 instead, you called the minutes hours. Second, the time should feel right for the length: a 60,000-word book in 5 hours is about 12,000 words an hour, which is a steady reading pace, not a sprint. If the answer says 5 minutes or 500 hours, a number went in wrong — usually the speed typed as words per hour, or the word count typed as the page count.
Frequently asked questions
How do I calculate reading time?
Divide the word count by your reading speed in words per minute. That gives the time in minutes; divide by 60 to get hours. For 60,000 words at 200 words a minute, that is 300 minutes, or 5 hours.
How long does it take to read 60,000 words?
At 200 words a minute, 5 hours. At 150 words a minute it takes 6 hours and 40 minutes, and at 250 words a minute it takes 4 hours.
What reading speed should I use?
An average adult reads about 200 to 250 words a minute for ordinary prose. Use 150 for dense or technical material, and measure your own speed if the result matters.
How do I find the word count of a book?
Most word processors show it at the bottom of the screen. For a printed book, multiply the pages by the words on a page — at 250 words a page, a 240-page book is about 60,000 words.
More guides on the Reading Time Calculator
- Reading Time formula explained simply
- Reading Time: worked example step by step
- Reading Time for beginners
- Common mistakes when calculating reading time
- Reading Time vs words per minute: what's the difference
- How to use a reading time calculator
- Reading Time quick reference table
- Reading Time in real life: everyday examples
- Reading Time practice questions with answers
Try the Reading Time Calculator — free, in your browser.