← All blog posts

Reading Time practice questions with answers

WhiteUI · A plain-English guide to the Reading Time Calculator

The best way to check you can calculate reading time is to try it. Below are five questions, each with a full answer and its working, covering the four directions of the calculation: the time from a word count, the effect of speed, a dense text at a slower speed, and a long text at two speeds. Work each one out on paper before you read its answer.

Five practice questions with answers, from a thirty thousand word report at two hours thirty minutes to a one hundred twenty thousand word book at ten hours
Five questions, five answers: work each one out on paper first, then check your answer against the working below.

Question 1: 30,000 words at 200 words a minute

A report is 30,000 words long. You read at 200 words a minute. How long will it take to read? Divide the words by the speed: 30,000 ÷ 200 = 150 minutes. Then turn the minutes into hours: 150 ÷ 60 = 2 hours and 30 minutes. That is the answer: 2 hours and 30 minutes of reading. As a check, 150 minutes × 200 words a minute = 30,000 words, which is the report you started with. The arithmetic closes, so the answer is right.

Question 2: 90,000 words at 250 words a minute

A book is 90,000 words long. You read at 250 words a minute. How long will it take? Divide the words by the speed: 90,000 ÷ 250 = 360 minutes. Then turn the minutes into hours: 360 ÷ 60 = 6 hours exactly. That is the answer: 6 hours. Compare it with the same book at 200 words a minute, which takes 90,000 ÷ 200 = 450 minutes, or 7 hours and 30 minutes. The extra 50 words a minute saves an hour and a half on this book — the biggest saving of the five questions, because the book is long.

Question 3: 18,000 words at 150 words a minute

A dense chapter is 18,000 words long, and you read dense material at 150 words a minute. How long will it take? Divide the words by the speed: 18,000 ÷ 150 = 120 minutes. Then turn the minutes into hours: 120 ÷ 60 = 2 hours exactly. That is the answer: 2 hours. Note the speed: at 200 words a minute the same chapter would take 90 minutes, but a dense chapter is not read at 200 words a minute, and the honest answer is the slower one. Using the right speed matters more than the arithmetic.

Question 4: 120,000 words at two speeds

A long book is 120,000 words. How long does it take at 200 words a minute, and how long at 300? At 200 words a minute: 120,000 ÷ 200 = 600 minutes, which is 10 hours. At 300 words a minute: 120,000 ÷ 300 = 400 minutes, which is 6 hours and 40 minutes. The gap between the two readers is 3 hours and 20 minutes on the same book. As a check, 600 minutes × 200 = 120,000 words, and 400 minutes × 300 = 120,000 words — both multiplications land back on the word count, so both answers are right.

Question 5: 45,000 words at 225 words a minute

A book is 45,000 words long — 180 pages at 250 words a page — and you read at 225 words a minute. How long will it take? Divide the words by the speed: 45,000 ÷ 225 = 200 minutes. Then turn the minutes into hours: 200 ÷ 60 = 3 hours and 20 minutes, because 200 ÷ 60 is 3 with 20 left over. That is the answer: 3 hours and 20 minutes. The speed is not a round number, and the answer is not a round number either — but the method is the same as every other question: words divided by speed, then minutes divided by 60.

How to mark yourself

Five out of five means the method is solid: you can work out the time from a word count, the effect of speed, the slower speed for dense text, and a long text at two speeds. Three or four means the formula is there but the checks need work: minutes × speed should equal the word count, and minutes ÷ 60 should give the hours. Fewer than three means the worked examples in the first two questions are the place to start again: copy the steps line by line until the pattern sticks.

Frequently asked questions

How should I practise reading time calculations?

Work each question on paper first, then check it. Start with the basic calculation — a 30,000-word report at 200 words a minute is 2 hours and 30 minutes — before trying dense texts and two speeds.

How long does a 30,000-word report take to read?

2 hours and 30 minutes at 200 words a minute: 30,000 ÷ 200 = 150 minutes, and 150 ÷ 60 = 2 hours and 30 minutes.

How long does a 120,000-word book take to read?

At 200 words a minute, 10 hours. At 300 words a minute, 6 hours and 40 minutes. The gap between the two readers is 3 hours and 20 minutes on the same book.

What if my answer does not match the worked answer?

Check the speed first — a speed typed as 20 instead of 200 is the usual culprit — then check that you divided words by speed, not the other way round, and that you divided the minutes by 60.

More guides on the Reading Time Calculator

Try it yourself

Try the Reading Time Calculator — free, in your browser.

Open the Reading Time Calculator