← All blog posts

Common mistakes when calculating reading time

WhiteUI · A plain-English guide to the Reading Time Calculator

Most reading time mistakes are not arithmetic slips. They are the same five misunderstandings, made again and again: calling minutes hours, using one speed for every kind of text, guessing the word count, forgetting breaks, and counting the wrong thing. Each one is easy to spot once you know what it looks like, and each one has a simple fix. Work through them once, and your answers will be right first time.

The same division with two answers: calling the answer hours gives three hundred hours, calling it minutes gives three hundred minutes, which is five hours
The same division, two answers: 60,000 ÷ 200 is 300 minutes, which is 5 hours — not 300 hours.

Mistake 1: calling minutes hours

The commonest mistake is reading the answer in the wrong unit. The division gives minutes: 60,000 ÷ 200 = 300, and that 300 is minutes, not hours. Three hundred hours is twelve and a half days of non-stop reading, which is plainly wrong for a short novel; 300 minutes is 5 hours, which is right. The fix is to say the unit out loud as you divide — “300 minutes” — and then divide by 60 before you say “hours”. If your answer says a book takes 300 hours, the maths was right and the unit was wrong.

Mistake 2: using one speed for every text

Two hundred words a minute is an average for ordinary prose, not a speed for everything. Dense material — a textbook, a contract, a technical paper — is read closer to 150 words a minute, and light fiction can be faster, toward 250 or 300. Use 200 for a dense 60,000-word textbook and the answer is 5 hours; the honest answer at 150 words a minute is 60,000 ÷ 150 = 400 minutes, or 6 hours and 40 minutes. That is 1 hour and 40 minutes missing from the plan. The fix is to match the speed to the text: 150 for dense, 200 for ordinary, 250 or more for light reading.

Mistake 3: guessing the word count

A guessed word count gives a guessed answer. The usual guess is the page count used as the word count: a 240-page book typed in as 240 words takes about a minute to read, which is plainly wrong. The fix is to multiply the pages by the words on a page: at 250 words a page, 240 pages is 60,000 words. If the book is in a word processor, read the count off the screen instead of guessing — it takes five seconds, and it is exact.

Mistake 4: forgetting breaks

Reading time is pure reading time. A 5-hour reading time means 5 hours of eyes on the page, not 5 hours from start to finish. With a ten-minute break every hour, the same book takes closer to 6 hours of clock time, and with lunch in the middle, closer to 7. The fix is to add breaks after the calculation, not inside it: work out the reading time first, then add the breaks you know you will take.

Mistake 5: counting the wrong thing

Words are not characters, and they are not pages. A 60,000-character text is about 12,000 words, not 60,000, and dividing 60,000 by 200 gives 5 hours for a text that really takes 1 hour. The fix is to check what the number counts before you divide: word processors show a word count and a character count side by side, and the one you want is words. If the count looks far too big for the text in front of you, it is probably characters.

How to check any answer

Three checks catch all five mistakes. First, multiply the time back by the speed: 300 minutes × 200 words a minute should come out close to the 60,000 words you started with. Second, say the unit out loud: minutes, then hours after dividing by 60. Third, the time should feel right for the length: a novel in 5 hours is a steady pace, and a novel in 5 minutes is a typo. Run those three checks on every answer, and a wrong one will stand out before it reaches your plan.

Frequently asked questions

Why does my reading time look far too long?

Usually the minutes were called hours. 60,000 ÷ 200 = 300 minutes, which is 5 hours — not 300 hours. Divide the minutes by 60 before you say hours.

Why is my reading time shorter than the real reading took?

Usually the speed was too high for the text. A dense 60,000-word textbook at 150 words a minute takes 6 hours and 40 minutes, not the 5 hours that 200 words a minute gives.

Does reading time include breaks?

No. It is pure reading time. A 5-hour reading time with a ten-minute break every hour takes closer to 6 hours of clock time — add breaks after the calculation, not inside it.

Should I count words or characters?

Words. A 60,000-character text is about 12,000 words, and dividing 60,000 by 200 gives 5 hours for a text that really takes 1 hour.

More guides on the Reading Time Calculator

Try it yourself

Try the Reading Time Calculator — free, in your browser.

Open the Reading Time Calculator