← All blog posts

Why your grade result looks wrong

WhiteUI · A plain-English guide to the Grade Calculator

A grade that looks wrong usually is not a broken calculator. It is one of a handful of small slips, and each one leaves a recognisable mark on the answer. This guide works through the slips in the order they show up most often, using the same three scores throughout — 85, 90 and 78, with weights of 30, 40 and 30 — so you can compare each wrong answer with the right one: 84.90%, a B. Check your own numbers on the Grade Calculator as you read.

Three answers for the same three scores: the simple average is 84.33 percent, the correct weighted grade is 84.90 percent, and entering marks instead of percentages gives 72.00 percent
Same three scores, three different answers: only the weighted grade of 84.90% is right — the other two come from the slips explained below.

Slip 1: the simple average instead of the weighted grade

The commonest cause of a wrong-looking grade is averaging the scores without their weights. The simple average of 85, 90 and 78 is (85 + 90 + 78) ÷ 3 = 84.33%. It is close to the right answer, which is why it passes unnoticed — but it ignores the weights. The weighted grade is (85 × 30 + 90 × 40 + 78 × 30) ÷ 100 = 8,490 ÷ 100 = 84.90%. The gap is small here, half a point, but it grows when the weights are uneven. With a score of 60 carrying weight 10 and a score of 95 carrying weight 90, the weighted grade is 91.50% — an A — while the simple average is 77.50%, a C. If your grade is a full letter away from what you expected, check the weights first.

Slip 2: marks entered instead of percentages

The second slip is entering a score as marks out of its total instead of as a percentage. A homework score of 42 out of 50 is 84%, but if you type 42 into the calculator, it treats it as 42%. With our three scores that mistake gives (42 × 30 + 90 × 40 + 78 × 30) ÷ 100 = 7,200 ÷ 100 = 72.00% — more than twelve points below the right answer, and a C instead of a B. The fix is to convert every score to a percentage before it touches the calculator: divide the marks by the total and multiply by 100. So 42 out of 50 becomes 84, 72 out of 90 becomes 80, and 160 out of 200 becomes 80.

Slip 3: weights in two different units

Weights can be written as whole numbers, as small numbers, or as decimals — 30, 40 and 30; 3, 4 and 3; or 0.30, 0.40 and 0.30 — and all three give the same answer, 84.90%, because the formula divides by the total weight. The trouble starts when the units are mixed on the same page. Enter 85 with weight 30 and 90 with weight 0.4, and the calculator works out (85 × 30 + 90 × 0.4) ÷ 30.4 = 2,586 ÷ 30.4 = 85.07%. That is not far from 84.90%, so it looks plausible, but it is wrong: the 0.4 was meant to be 40, and the second score has been given almost no weight at all.

Slip 4: a missing weight counts as 1

A line with no weight counts as weight 1, which is the calculator’s rule for a plain score. That is correct when the score really is unweighted — but if you meant to give it a weight and forgot, the grade quietly shifts. Enter 85 with weight 30, 90 with weight 40 and 78 with no weight at all, and the answer is (2,550 + 3,600 + 78) ÷ 71 = 6,228 ÷ 71 = 87.72%. The third score has shrunk from a third of the grade to a seventy-first of it, and the grade has risen by nearly three points.

How to check any grade in a minute

Three checks catch all four slips. First, re-add the working by hand: 85 × 30 is 2,550, 90 × 40 is 3,600 and 78 × 30 is 2,340, which add to 8,490, and 8,490 ÷ 100 is 84.90. Second, check that every score is a percentage and every weight is in the same units. Third, check the letter against the bands: 90 and above is an A, 80 and above a B, 70 and above a C, 60 and above a D, and below 60 an F.

Frequently asked questions

Why is my grade lower than the average of my scores?

Because the weights matter. The simple average of 85, 90 and 78 is 84.33%, but the weighted grade with weights 30, 40 and 30 is 84.90% — and with uneven weights the gap can be a whole letter grade.

Why does my grade change when I add a score with no weight?

A line with no weight counts as weight 1. If the other weights are 30 and 40, that score counts for almost nothing, so the grade shifts toward the weighted scores.

My grade is 89.96% but the letter is B. Why?

The A band starts at 90, and the calculator compares the unrounded grade. 89.96% rounds to 90.00 on screen, but it is still below 90, so it is a B.

Can a grade be impossible to reach?

Yes. If you are on 84.90% with 70% of the course done, reaching 90% needs 101.90% on the final — more than full marks. Work the needed score out before the exam.

More guides on the Grade Calculator

Try it yourself

Try the Grade Calculator — free, in your browser.

Open the Grade Calculator