← All blog posts

Grade cheat sheet

WhiteUI · A plain-English guide to the Grade Calculator

Keep this page open while you work, and you will not need to look anything up. It holds the whole grade calculation on one card: the formula, the letter bands, the conversions, the final-exam shortcut, and the worked example to check against. Everything here matches the Grade Calculator, so the numbers you work out by hand and the numbers the page gives you should agree exactly.

A cheat sheet: the weighted grade formula, the letter bands, and the three conversions to remember
The whole calculator on one card: the formula, the letter bands, the conversions — and the worked example, 84.90%, a B.

The formula

grade = (score₁ × weight₁ + score₂ × weight₂ + …) ÷ (weight₁ + weight₂ + …)

Multiply each score by its weight, add the results, and divide by the total weight. That is the whole calculation. For scores of 85, 90 and 78 with weights of 30, 40 and 30, it is (85 × 30 + 90 × 40 + 78 × 30) ÷ 100 = 8,490 ÷ 100 = 84.90%. If the weights are 3, 4 and 3 instead, the answer is the same: (85 × 3 + 90 × 4 + 78 × 3) ÷ 10 = 849 ÷ 10 = 84.90%. If every score has the same weight, or no weight at all, the formula becomes a simple average — which is why a plain average is right only when nothing is weighted.

The letter bands

GradeLetter
90% and aboveA
80% to 89.99%B
70% to 79.99%C
60% to 69.99%D
Below 60%F

The bands are the ones this calculator uses. A grade of 84.90% is a B, and it stays a B until it reaches 90 — 89.90% is still a B, and so is 89.96%, even though it displays as 90.00. The calculator compares the unrounded grade with the band edges, so there is no rounding up across a boundary. Your school or college may use different bands, so check the course handbook before relying on the letter for anything that matters.

Marks to percentages

Convert every score to a percentage before it touches the weights: percentage = marks ÷ total × 100. The three to remember are 42 out of 50 = 84%, 72 out of 90 = 80%, and 160 out of 200 = 80%. A score entered as raw marks is always smaller than its percentage, so it always pulls the grade down — entering 42 instead of 84 on our example gives 72.00% instead of 84.90%. Convert first, then weight, and the units will take care of themselves.

The final-exam shortcut

Needed score = (target − current grade × current weight) ÷ final weight, with the weights as decimals. Two cases to remember: on 88% with 70% of the course done and a 30% final, reaching 90% needs 94.67%. On 80% with 60% done and a 40% final, reaching 85% needs 92.50%. If the answer comes out above 100, the target is out of reach — from 84.90% with 70% done, even full marks on the final only reaches 89.43%. Work the number out before the exam, not after it.

When weights change everything

The one case worth memorising is the uneven pair: a score of 60 with weight 10 and a score of 95 with weight 90. The weighted grade is (60 × 10 + 95 × 90) ÷ 100 = 9,150 ÷ 100 = 91.50%, an A. The simple average of the same two scores is 77.50%, a C. Fourteen points and two letter grades apart, from the same two numbers, and the only difference is the weights. Whenever a grade looks a letter away from what you expected, the weights are the first thing to check.

The five-second check

Before trusting any grade, run three checks. Re-add the working: 85 × 30 is 2,550, 90 × 40 is 3,600 and 78 × 30 is 2,340, which add to 8,490, and 8,490 ÷ 100 is 84.90. Check that every score is a percentage and every weight is in the same form. And check the letter against the bands above. If all three pass, the grade is right — and any surprise left is in the expectation, not the arithmetic.

Frequently asked questions

What is the weighted grade formula?

Grade = (score × weight + score × weight + …) ÷ total weight. For 85, 90 and 78 with weights 30, 40 and 30, that is 8,490 ÷ 100 = 84.90%.

What are the letter grade bands?

90 and above is an A, 80 and above a B, 70 and above a C, 60 and above a D, and below 60 an F. 84.90% is a B.

How do I convert marks to a percentage?

Divide the marks by the total and multiply by 100. 42 out of 50 is 84%, 72 out of 90 is 80%, and 160 out of 200 is 80%.

What score do I need on the final exam?

Needed score = (target − current grade × current weight) ÷ final weight. On 88% with 70% done and a 30% final, reaching 90% needs 94.67%.

More guides on the Grade Calculator

Try it yourself

Try the Grade Calculator — free, in your browser.

Open the Grade Calculator