Common mistakes when calculating grade
Most wrong answers come from a small set of slips, not from hard maths. Here are the ones to watch for, with the correction for each.
Averaging scores without their weights. A test worth 40% counts twice as much as one worth 20%. A plain average of 85 and 90 is 87.50, but weighted 30 and 70 it is 85 × 0.30 + 90 × 0.70 = 88.50.
Using weights that do not add to 100. If the weights add to 90, dividing by 100 understates the grade. Either scale the weights so they add to 100, or divide by the weights’ actual total.
Rounding each weighted part before adding. Rounding 85 × 0.30 = 25.50 to 26 and similar parts can shift the total by a whole mark. Keep two decimals until the final answer.
Worked example to test yourself against: Scores of 85, 90 and 78 with weights of 30, 40 and 30 give 85 × 30 + 90 × 40 + 78 × 30 = 2,550 + 3,600 + 2,340 = 8,490, and 8,490 ÷ 100 = 84.90%, which is a B. A second example: scores of 92 and 76 with equal weights of 50 each give 92 × 50 + 76 × 50 = 4,600 + 3,800 = 8,400, and 8,400 ÷ 100 = 84.00%, also a B. A third check: 90 and 80 at 40 and 60 give 3,600 + 4,800 = 8,400 ÷ 100 = 84.00%. If your calculator gives a different answer for those inputs, one of the slips above is almost certainly the cause.
Weighted grade or plain average: which one does your course use?
Many students use a plain average when their course actually uses weights, and the gap can be several marks. Take two scores: 70 on a test worth 70% of the grade, and 95 on a test worth 30%. The plain average is (70 + 95) ÷ 2 = 82.50. The weighted grade is 70 × 0.70 + 95 × 0.30 = 49 + 28.50 = 77.50 — five marks lower, because the low score carries most of the weight.
The rule is simple: if any assessment counts more than another, use weights. A plain average is only right when every score counts equally. Before you calculate, read the course outline and write the weights down next to each score. If the outline says “internal assessment 40%, final exam 60%”, those are your weights, and a plain average of the two marks will mislead you every time. When in doubt, ask the teacher which weighting applies — guessing wrong here costs more marks than any arithmetic slip.
What to check before you submit a grade
Check the weights first: they must add to 100. If they add to 90 or 110, the answer will be off however carefully you multiply. Next, check that each score is out of the same total — a score out of 50 mixed with a score out of 100 needs converting first. Then do a quick test with numbers you can check by hand: scores of 60, 80 and 90 with weights of 20, 30 and 50 give 60 × 0.20 + 80 × 0.30 + 90 × 0.50 = 12 + 24 + 45 = 81.00. If the calculator gives a different answer for those inputs, one weight or score is entered wrong.
Finally, check the answer sits between your lowest and highest scores. A weighted grade can never be above your best score or below your worst. If it is, a weight is wrong — usually one typed as 30 instead of 0.30, or a percentage entered where a decimal belonged.
Frequently asked questions
What is the single most common mistake?
Entering a number in the wrong unit, or applying a percentage to the wrong base. Convert to the base unit first, every time.
How do I catch a mistake before it matters?
Sanity-check the answer: does it sit in a plausible range, and does changing one input move it in the direction you expect?
What if my result looks wrong?
Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.
More guides on the Grade Calculator
Enter scores and their weights to see the weighted grade and the letter it falls in.