How to calculate grade
Calculating grade starts with the inputs, not the answer. Gather the numbers first, in the order the calculator asks for them, and make sure each one is in the right unit before you type anything in.
The formula is: Weighted grade = (score₁ × weight₁ + score₂ × weight₂ + …) ÷ (weight₁ + weight₂ + …). Weights are usually percentages that add to 100, and the letter bands used here are A at 90% and above, B from 80% to 89%, and C from 70% to 79%.
Worked example: Scores of 85, 90 and 78 with weights of 30, 40 and 30 give 85 × 30 + 90 × 40 + 78 × 30 = 2,550 + 3,600 + 2,340 = 8,490, and 8,490 ÷ 100 = 84.90%, which is a B.
A second example: scores of 92 and 76 with equal weights of 50 each give 92 × 50 + 76 × 50 = 4,600 + 3,800 = 8,400, and 8,400 ÷ 100 = 84.00%, also a B. A third check: 90 and 80 at 40 and 60 give 3,600 + 4,800 = 8,400 ÷ 100 = 84.00%.
A habit worth building: run at least three versions of every calculation — your best guess, a lower case and a higher case — and write down the results. The range tells you more than any single number, and it stops one optimistic input from quietly deciding the answer.
Weighted grade or simple average — which one applies
The weighted grade and the simple average agree only when every weight is equal, and on real coursework they almost never are. Take scores of 70, 85 and 95 with weights of 20, 30 and 50: the weighted grade is (70 × 20 + 85 × 30 + 95 × 50) ÷ 100 = (1,400 + 2,550 + 4,750) ÷ 100 = 8,700 ÷ 100 = 87.00%, which is a B. The simple average is (70 + 85 + 95) ÷ 3 = 83.33% — 3.67 points lower, because it treats the 95 as if it counted for a third of the grade when it actually counted for half. A second check makes the same point from the other side: scores of 95 and 88 with weights of 60 and 40 give (95 × 60 + 88 × 40) ÷ 100 = (5,700 + 3,520) ÷ 100 = 9,220 ÷ 100 = 92.20%, which is an A — while the simple average of the two scores is 91.50%, which understates the grade because the higher score carried the heavier weight. Use the weighted figure whenever the weights differ; the simple average is right only when all the weights are equal, and using it otherwise quietly hands marks to the lightest-weighted piece of work.
What to check before you trust the grade
Four checks before the grade goes anywhere. First, the weights must add to 100: 20 + 30 + 50 is 100, but weights that add to 90 or 110 mean one of them was typed wrong, and the answer will be wrong in proportion. Second, the most common slip of all: a weight typed as a decimal instead of a percent — 0.5 instead of 50 — halves that score’s contribution without any warning, so check whether your calculator wants 50 or 0.50 before you type anything. Third, the letter bands differ by school: the bands used here put A at 90% and above and B from 80% to 89%, but your school may set A at 93% or at 85%, so confirm the bands before you read a letter off a percentage. Fourth, a score entered as a decimal instead of a percent — 0.85 instead of 85 — will wreck the answer just as surely as a wrong weight, so read each field back after you type it and check the units match the labels.
Frequently asked questions
Where do I start?
Start with the inputs the formula needs, in the order the calculator lists them, then read the headline result and the lines beneath it.
What does the headline number mean?
It is the answer you came for. The lines beneath it break that answer into its parts, so you can trace where it came from.
What if my result looks wrong?
Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.
More guides on the Grade Calculator
Enter scores and their weights to see the weighted grade and the letter it falls in.