← All blog posts

The complete guide to grade

WhiteUI · A plain-English guide to the Grade Calculator

A grade is a single number that stands for a whole term of work, and this guide explains everything that goes into it: what the number means, how weights shape it, how letters and GPAs relate to it, how to plan for the final exam, and how to check it. The worked example throughout is 85, 90 and 78 with weights of 30, 40 and 30, giving 84.90%, a B — the Grade Calculator gives the same answer for your numbers.

The complete grade calculation in four steps: convert to percentages, multiply each score by its weight, add the results, and divide by the total weight
Four steps, one grade: convert to percentages, multiply each score by its weight, add them up, and divide by the total weight.

What a grade is

A grade is a weighted average of scores, expressed as a percentage. Each score is a mark out of a total, converted to a percentage — 42 out of 50 is 84%, 72 out of 90 is 80%. Each score then counts according to its weight — the share of the course it represents.

The formula, in four steps

The calculation has four steps. First, convert every score to a percentage: marks ÷ total × 100. Second, multiply each score by its weight: 2,550, 3,600 and 2,340. Third, add the products (8,490) and the weights (100). Fourth, divide: 8,490 ÷ 100 = 84.90%. The formula is grade = (score × weight + score × weight + …) ÷ total weight. Weights need not add to 100, and a line with no weight counts as 1.

grade = (score₁ × weight₁ + score₂ × weight₂ + …) ÷ (weight₁ + weight₂ + …)
85 (30), 90 (40), 78 (30) → 8,490 ÷ 100 = 84.90% → B

Why weights matter more than scores

Weights decide a grade more than any single score does. Take a score of 60 with weight 10 and a score of 95 with weight 90. The weighted grade is (60 × 10 + 95 × 90) ÷ 100 = 9,150 ÷ 100 = 91.50%, an A. The simple average of the same two scores is 77.50%, a C. Fourteen points and two letter grades apart, from the same two numbers, and the only difference is the weights. That is why the weights are the first thing to check when a grade surprises you.

Letters and GPAs

The percentage becomes a letter on bands: 90 and above is an A, 80 and above a B, 70 and above a C, 60 and above a D, and below 60 an F. So 84.90% is a B, and it stays a B until it reaches 90 — 89.90% is still a B. In college the letters become a GPA on a 4.0 scale, where A is 4, B is 3, C is 2, D is 1 and F is 0. Four courses graded A, B, A and C give (4 + 3 + 4 + 2) ÷ 4 = 3.25. The bands here are the common ones, not universal ones — check your institution’s before relying on the letter.

Planning for the final exam

The most useful grade calculation is the one done before the final exam: what score does it have to deliver? The formula is needed score = (target − current grade × current weight) ÷ final weight, with the weights as decimals. On 88% with 70% of the course done and a 30% final, reaching 90% needs (90 − 88 × 0.70) ÷ 0.30 = 94.67%. If the answer comes out above 100, the target is out of reach: from 84.90% with 70% done, even full marks on the final only reaches 89.43%. Do this calculation early, and reset the target when the arithmetic says so.

The mistakes to avoid

Five slips cause most wrong grades. Entering marks instead of percentages: 42 out of 50 must go in as 84, not 42. Mixing weight units: 30 with 0.4 on the same page makes the second score nearly weightless. Leaving a weight blank, so the line counts as 1 among weights of 30 and 40. Using the simple average when the weights are uneven. And rounding in the middle instead of at the end. The check for all five is the same: re-add the working, confirm the units, and compare the letter with the bands. When the hand check and the calculator agree, the grade is right.

Frequently asked questions

What is a grade, in one sentence?

A weighted average of scores, expressed as a percentage: each score is converted to a percentage, multiplied by its weight, and the total is divided by the total weight.

How much do weights matter?

A lot. A 60 with weight 10 and a 95 with weight 90 give 91.50%, an A, while the simple average of the same scores is 77.50%, a C.

What score do I need on the final exam?

Needed score = (target − current grade × current weight) ÷ final weight. On 88% with 70% done and a 30% final, reaching 90% needs 94.67%.

Is 89.96% an A?

No — it is a B. The A band starts at 90, and the calculator compares the unrounded grade, so a grade that displays as 90.00 is still a B until it truly reaches 90.

What is a GPA?

A grade point average on a 4.0 scale: A is 4, B is 3, C is 2, D is 1 and F is 0. Four courses graded A, B, A and C give a GPA of 3.25.

More guides on the Grade Calculator

Try it yourself

Try the Grade Calculator — free, in your browser.

Open the Grade Calculator