← All blog posts

All tools / Calculators / Physics / Ohm’s Law Calculator / Ohm's Law: worked example step by step

Ohm's Law: worked example step by step

WhiteUI · A plain-English guide to the Ohm’s Law Calculator

This guide does one example slowly, with every step shown, and then repeats the same steps on three shorter examples. The circuit is a 9-volt battery connected to a 3-ohm resistor. The question is simple: how much current flows? The answer is 3 amps, and the power is 27 watts.

A diagram showing 9 volts divided by 3 ohms equals 3 amps, with the check 3 amps times 3 ohms equals 9 volts
9 volts across 3 ohms is 3 amps. The check, 3 × 3 = 9, proves it.

Step 1: write down what you know

Start by writing the two numbers with their units: voltage 9 volts, resistance 3 ohms. The unknown is the current, in amps. Writing the units down matters, because the units of the answer come from the units of the inputs, and it is the step where a milliamp or a kilohm would be converted. The Ohm's Law Calculator takes the same two numbers, voltage and resistance, and nothing else.

Step 2: pick the form of the law that gives the unknown

The unknown is current, so use I = V ÷ R. That is the form with current on its own on the left. If the unknown had been resistance, you would use R = V ÷ I, and if it had been voltage, V = I × R. Picking the form first, before touching any numbers, stops the most common error in these problems: dividing the wrong way round.

Step 3: put the numbers in and divide

Put the numbers into I = V ÷ R: I = 9 ÷ 3 = 3 amps. That is the whole calculation. The power follows from P = V × I: 9 × 3 = 27 watts, so the resistor turns 27 watts of electrical energy into heat each second.

Step 4: check the answer by working backwards

A good worked example always ends with a check. Multiply the answer by the resistance: 3 amps × 3 ohms = 9 volts. That matches the battery voltage the problem started with, so the answer is right. This backwards check works for every Ohm's law calculation, and it is the fastest way to catch a slip. It also works as a sense check on its own: 3 amps is a sensible current for a small battery circuit, while 0.33 amps or 27 amps would have been a sign that the division went the wrong way.

Three more examples using the same steps

Try the same four steps on other circuits. A 12-volt battery across a 4-ohm resistor: I = 12 ÷ 4 = 3 amps, power 12 × 3 = 36 watts, and the check is 3 × 4 = 12 volts. Find a resistance: a 24-volt supply driving 2 amps means R = 24 ÷ 2 = 12 ohms, and the check is 2 × 12 = 24 volts. Find a voltage: 3 amps through a 10-ohm resistor needs V = 3 × 10 = 30 volts, and the check is 30 ÷ 10 = 3 amps. Each one uses the same method as the main example.

The common mistake

The usual slip in a worked example is skipping the check and trusting the first number that comes out. The division 3 ÷ 9 gives 0.33, which looks like an answer but is the wrong way round, and without the backwards check there is nothing to catch it. Two seconds of checking — multiply the current by the resistance and see whether the voltage comes back — turns a guess into a verified answer.

Frequently asked questions

What is 9 V across 3 ohms in amps?

9 ÷ 3 = 3 A. Check it: 3 × 3 = 9 V. The power is 9 × 3 = 27 W.

How do I check an Ohm's law answer?

Multiply the answer back. Current × resistance should equal the voltage: 3 A × 3 Ω = 9 V.

What is 12 V across 4 ohms?

12 ÷ 4 = 3 A, with power 12 × 3 = 36 W.

How do I find voltage from current and resistance?

Multiply them: V = I × R. 3 A through 10 Ω needs 3 × 10 = 30 V.

More guides on the Ohm’s Law Calculator

Try it yourself

Try the Ohm’s Law Calculator — free, in your browser.

Open the Ohm’s Law Calculator