← All blog posts

All tools / Calculators / Physics / Ohm’s Law Calculator / Ohm's Law quick reference table

Ohm's Law quick reference table

WhiteUI · A plain-English guide to the Ohm’s Law Calculator

Some Ohm's law values come up so often that it is quicker to look them up than to calculate them each time. This page gathers the common ones — batteries, chargers, bulbs and heaters — in tables of voltage, resistance, current and power, side by side. Every figure below was worked out with the same formulas the Ohm's Law Calculator uses: I = V ÷ R and P = V × I.

A diagram showing that 12 volts divided by 4 ohms equals 3 amps, with power 36 watts
12 volts across 4 ohms is 3 amps and 36 watts. The tables below give the same four numbers for common circuits.

Common circuits: voltage, resistance, current and power

VoltageResistanceCurrentPower
1.5 V10 Ω0.15 A0.225 W
3 V10 Ω0.3 A0.9 W
5 V10 Ω0.5 A2.5 W
9 V3 Ω3 A27 W
12 V4 Ω3 A36 W
12 V6 Ω2 A24 W
24 V12 Ω2 A48 W
24 V8 Ω3 A72 W
230 V52.9 Ω4.35 A1000 W

Read any row left to right: the first two numbers give the last two. A 9-volt battery across 3 ohms gives 3 amps and 27 watts; a 24-volt supply across 8 ohms gives 3 amps and 72 watts. The last row is a 1000-watt heater on 230-volt mains: 230 ÷ 52.9 = 4.35 amps, and 230 × 4.35 = 1000 watts, near enough once the rounding is allowed for.

One voltage, several resistances

The second table holds the voltage fixed at 12 volts — a car battery, or a common bench supply — and varies the resistance, so you can see how the current falls as resistance rises.

VoltageResistanceCurrentPower
12 V2 Ω6 A72 W
12 V4 Ω3 A36 W
12 V6 Ω2 A24 W
12 V12 Ω1 A12 W
12 V24 Ω0.5 A6 W

Doubling the resistance halves the current: 2 ohms gives 6 amps, 4 ohms gives 3, and 24 ohms gives 0.5. The power falls with it, from 72 watts down to 6. That is the pattern Ohm's law describes — resistance holds the current back, so more resistance means less current and less power at the same voltage.

How to use these tables

Find the row closest to your circuit and read across for the missing value. A 5-volt USB charger circuit with a 10-ohm load draws 0.5 amps and uses 2.5 watts. A 12-volt circuit drawing 2 amps has a resistance of 6 ohms. If your exact values are not listed, use the nearest row and adjust, or type the numbers into the Ohm's Law Calculator for the exact figure.

The common mistake

The usual error with reference tables is reading the wrong column. The current column is in amps, not milliamps: the 0.15 amps in the first row is 150 milliamps, and the 0.5 amps in the 12-volt table is 500 milliamps. Always check the column heading before copying a number, and if a current seems far too big or too small for the circuit, check whether amps and milliamps were mixed up.

Frequently asked questions

What is 12 V across 4 ohms?

12 ÷ 4 = 3 A, with power 12 × 3 = 36 W.

What is 9 V across 3 ohms?

9 ÷ 3 = 3 A, with power 9 × 3 = 27 W.

How much current does a 1000 W heater draw at 230 V?

1000 ÷ 230 = 4.35 A. Its resistance is 230 ÷ 4.35 = 52.9 Ω.

What happens to current when resistance doubles?

It halves. At 12 V, 2 Ω gives 6 A and 4 Ω gives 3 A.

More guides on the Ohm’s Law Calculator

Try it yourself

Try the Ohm’s Law Calculator — free, in your browser.

Open the Ohm’s Law Calculator