All tools / Calculators / Physics / Ohm’s Law Calculator / Ohm's Law formula explained simply
Ohm's Law formula explained simply
Ohm's law is one sentence: the voltage across a resistor equals the current through it times its resistance. Written as a formula it is V = I × R, and everything else about the law is a rearrangement of those three letters. A torch battery, a phone charger and a heater all obey it. This guide explains what each letter means, how the formula turns around to find each value, and where power fits in.
What V, I and R mean
Voltage (V), measured in volts, is the push that drives current around a circuit — the higher the voltage, the harder the push. Current (I), measured in amps, is the flow itself: how much charge passes a point each second. Resistance (R), measured in ohms, is how much the circuit holds that flow back. A useful picture is water in a pipe: voltage is the water pressure, current is how much water flows, and resistance is how narrow the pipe is. More pressure pushes more water through; a narrower pipe lets less through.
The formula, and its two rearrangements
V = I × R I = V ÷ R R = V ÷ I
Start with voltage: 2 amps through a 6-ohm resistor needs V = 2 × 6 = 12 volts. Turn it around to find current: a 12-volt battery across a 6-ohm resistor gives I = 12 ÷ 6 = 2 amps. Turn it around again to find resistance: a 12-volt supply driving 2 amps means R = 12 ÷ 2 = 6 ohms. All three are the same fact, solved for a different unknown, and the Ohm's Law Calculator opens with exactly these numbers: 12 volts, 2 amps, 6 ohms.
Power joins in: P = V × I
Power, measured in watts, is how fast energy is used, and it comes from the same two numbers: P = V × I. The tool's own example gives P = 12 × 2 = 24 watts. Power and Ohm's law combine into two more forms worth knowing: P = I² × R and P = V² ÷ R. Both give the same answer for the same circuit, so they are a useful cross-check rather than extra rules to memorise.
Units that trip people up
Two unit conversions cause most errors. Milliamps must become amps before dividing: 500 mA is 0.5 A, so 12 volts across a circuit drawing 500 mA means R = 12 ÷ 0.5 = 24 ohms. Kilohms must become ohms: 2 kΩ is 2000 Ω, so 12 volts across 2 kΩ gives I = 12 ÷ 2000 = 0.006 A, which is 6 mA. Put milliamps or kilohms straight into the formula and the answer is off by a factor of a thousand.
The common mistake
The usual mistake with this formula is using it with mismatched units, or picking the wrong rearrangement. Both are caught by the same habit: write the units next to every number, and check the answer by working backwards. If you calculated a current of 2 amps from 12 volts and 6 ohms, multiply back: 2 × 6 = 12 volts. If the numbers do not return to where they started, either the division was the wrong way round or a unit was never converted.
Frequently asked questions
What is Ohm's law in simple words?
Voltage equals current times resistance: V = I × R. Double the voltage and double the current flows, for the same resistance.
What do V, I and R stand for?
V is voltage in volts, I is current in amps, and R is resistance in ohms.
How do I rearrange Ohm's law?
To find current, divide: I = V ÷ R. To find resistance, divide: R = V ÷ I. To find voltage, multiply: V = I × R.
What is 500 mA in amps?
0.5 A. Divide milliamps by 1000: 500 ÷ 1000 = 0.5 A, so 12 V ÷ 0.5 A = 24 Ω.
More guides on the Ohm’s Law Calculator
- How to calculate Ohm's law
- Ohm's Law: worked example step by step
- Ohm's Law for beginners
- Common mistakes when calculating Ohm's law
- Ohm's Law vs electrical power: what's the difference
- How to use a Ohm's law calculator
- Ohm's Law quick reference table
- Ohm's Law in real life: everyday examples
- Ohm's Law practice questions with answers
Try the Ohm’s Law Calculator — free, in your browser.