All tools / Calculators / Physics / Ohm’s Law Calculator / Ohm's Law in real life: everyday examples
Ohm's Law in real life: everyday examples
Ohm's law is not only a classroom formula. It is the rule behind torches, phone chargers, car headlamps and heaters, and the same division — voltage divided by resistance — gives the current in all of them. This guide works through real examples, from a torch battery to a mains heater.
A torch: small voltage, small current
Two AA batteries give 3 volts. A small torch bulb with a resistance of 15 ohms draws I = 3 ÷ 15 = 0.2 amps, which is 200 milliamps. The power is P = 3 × 0.2 = 0.6 watts, a fraction of a watt. A single AA battery at 1.5 volts across a 10-ohm bulb is even smaller: 1.5 ÷ 10 = 0.15 amps and 0.225 watts.
A phone charger: 5 volts, 2 amps
A phone charger supplies 5 volts. When a phone draws 2 amps from it, the effective resistance of the charging circuit is R = 5 ÷ 2 = 2.5 ohms, and the power is P = 5 × 2 = 10 watts — the 10-watt figure printed on the charger. A faster charger at the same 5 volts drawing 3 amps delivers 15 watts through a resistance of 5 ÷ 3 = 1.67 ohms.
A car headlamp: 12 volts, 55 watts
A car headlamp is rated 55 watts at 12 volts. The current is I = P ÷ V = 55 ÷ 12 = 4.58 amps, and the resistance of the hot filament is R = 12 ÷ 4.58 = 2.62 ohms. Two headlamps together draw 9.17 amps, which is why headlamp circuits have their own fuse, usually rated above 10 amps. Type the same numbers into the Ohm's Law Calculator and it gives the same answers.
A heater: mains voltage, big power
A 1000-watt heater on 230-volt mains draws I = 1000 ÷ 230 = 4.35 amps, and its element has a resistance of R = 230 ÷ 4.35 = 52.9 ohms. A 2000-watt heater draws twice the current, 8.70 amps, through half the resistance, 26.45 ohms. The mains voltage is nearly twenty times a car battery's, which is why mains appliances can deliver kilowatts through ordinary-looking wire — the same Ohm's law, with much bigger numbers.
A fuse: the current that must not flow
A fuse is Ohm's law used as a safety device. A 5-amp fuse in a 12-volt circuit blows if the current passes 5 amps. A load of 2 ohms across 12 volts would draw I = 12 ÷ 2 = 6 amps, which is more than the fuse allows, so the fuse melts and breaks the circuit before the wiring overheats. A load of 4 ohms draws 3 amps and the fuse holds. The fuse does not measure anything clever: it simply melts when the current through it gets too high.
The common mistake
The usual error with real-life examples is quoting watts as if they were amps. A 55-watt headlamp does not draw 55 amps — it draws 4.58 amps at 12 volts. A 1000-watt heater does not draw 1000 amps — it draws 4.35 amps at 230 volts. Watts and amps are different quantities, and the voltage is what connects them: amps equal watts divided by volts.
Frequently asked questions
How much current does a torch draw?
Two AA batteries (3 V) across a 15 Ω bulb give 3 ÷ 15 = 0.2 A, using 0.6 W.
How much current does a car headlamp draw?
A 55 W headlamp at 12 V draws 55 ÷ 12 = 4.58 A, through a resistance of 2.62 Ω.
How much current does a 1000 W heater draw?
At 230 V it draws 1000 ÷ 230 = 4.35 A, through a resistance of 52.9 Ω.
Why does a fuse blow?
A 12 V circuit with a 2 Ω load draws 12 ÷ 2 = 6 A, more than a 5 A fuse allows, so the fuse melts.
More guides on the Ohm’s Law Calculator
- How to calculate Ohm's law
- Ohm's Law formula explained simply
- Ohm's Law: worked example step by step
- Ohm's Law for beginners
- Common mistakes when calculating Ohm's law
- Ohm's Law vs electrical power: what's the difference
- How to use a Ohm's law calculator
- Ohm's Law quick reference table
- Ohm's Law practice questions with answers
Try the Ohm’s Law Calculator — free, in your browser.