All tools / Calculators / Physics / Ohm’s Law Calculator / How to calculate Ohm's law
How to calculate Ohm's law
Ohm's law is the one rule that ties together the three numbers in any simple electric circuit: voltage, current and resistance. If you know any two of them, you can work out the third with a single division or multiplication. A 12-volt battery pushing current through a 4-ohm resistor gives 3 amps, and that one calculation is the whole method. This guide shows all three forms of the law, works through each one with real numbers, and ends with the mistake that catches most people out.
The three forms of the law
V = I × R I = V ÷ R R = V ÷ I
The letters stand for voltage in volts (V), current in amps (I) and resistance in ohms (Ω). The three lines are the same relationship written three ways: voltage equals current times resistance, current equals voltage divided by resistance, and resistance equals voltage divided by current. Pick the line that has the unknown value on its own on the left, put your two known numbers in, and do the arithmetic.
Worked example: find the current
Take a 12-volt battery connected to a 4-ohm resistor. The current is voltage divided by resistance: I = 12 ÷ 4 = 3 amps. Check it by working backwards: 3 amps × 4 ohms = 12 volts, which is the battery voltage you started with. Try a second one with the same steps: a 9-volt battery across a 3-ohm resistor gives I = 9 ÷ 3 = 3 amps, and the power is 9 × 3 = 27 watts. The method never changes, only the numbers do.
Worked example: find the voltage and the resistance
The other two forms work the same way. To find voltage, multiply current by resistance: 2 amps through a 6-ohm resistor needs V = 2 × 6 = 12 volts. To find resistance, divide voltage by current: a 24-volt supply driving 2 amps means R = 24 ÷ 2 = 12 ohms. The Ohm's Law Calculator does these same three calculations, and shows the power as well: 12 volts × 2 amps = 24 watts.
The common mistake: dividing the wrong way round
The error that ruins most Ohm's law answers is dividing the wrong way round. Resistance is voltage divided by current, not current divided by voltage. For a 12-volt supply driving 3 amps, the right way gives R = 12 ÷ 3 = 4 ohms. The wrong way gives 3 ÷ 12 = 0.25 ohms, a value so small it should look wrong at once for an ordinary resistor. A quick sense check catches it: a normal resistor is a few ohms to a few hundred ohms, so an answer under 1 ohm for a small circuit deserves a second look, and multiplying the answer back (current × resistance should equal the voltage) proves it either way.
Frequently asked questions
What is the formula for Ohm's law?
Voltage equals current times resistance: V = I × R. The other two forms are I = V ÷ R and R = V ÷ I.
How do I calculate current from voltage and resistance?
Divide the voltage by the resistance. 12 V across 4 Ω is 12 ÷ 4 = 3 A.
How do I find resistance if I know voltage and current?
Divide voltage by current. 24 V driving 2 A means R = 24 ÷ 2 = 12 Ω.
How do I check my Ohm's law answer?
Multiply the answer back: current × resistance should equal the voltage. 3 A × 4 Ω = 12 V.
More guides on the Ohm’s Law Calculator
- Ohm's Law formula explained simply
- Ohm's Law: worked example step by step
- Ohm's Law for beginners
- Common mistakes when calculating Ohm's law
- Ohm's Law vs electrical power: what's the difference
- How to use a Ohm's law calculator
- Ohm's Law quick reference table
- Ohm's Law in real life: everyday examples
- Ohm's Law practice questions with answers
Try the Ohm’s Law Calculator — free, in your browser.