← All tools/Tools/Home & DIY/Wood Stain Calculator
Wood Stain Calculator
How many gallons of stain your deck, fence or floor needs — by wood type and coats.
Changing the wood type sets the coverage to 175, 250 or 375 sq ft per gallon. You can still adjust the coverage by hand.
Gallons to buy
How the number is worked out
How it works
Gallons needed = (surface area × number of coats) ÷ coverage per gallon × (1 + waste ÷ 100). Gallons to buy = ceil(gallons needed). Coverage defaults: rough wood 175, smooth wood 250, smooth sealed wood 375 sq ft per gallon.
Worked example: a 320 sq ft deck with 2 coats of stain on smooth wood at 250 sq ft per gallon needs 320 × 2 ÷ 250 = 2.56 gallons, so buy 3 gallons.
Frequently asked questions
Why does rough wood use more stain?
Rough wood is thirsty — its open grain soaks up far more stain than a smooth, sanded surface. Rough wood covers about 175 sq ft per gallon, smooth wood about 250.
Do I really need two coats?
For a deck or fence, yes. The first coat soaks in and seals the grain; the second coat gives the even colour and the weather protection. One coat fades much faster.
What if the stain I buy covers a different area?
Change the coverage figure to the one on the tin. The maths is the same — area times coats, divided by your tin’s coverage.
Should I add waste for stain?
A small allowance, 5–10%, is wise for a fence or a deck with lots of edges and end grain, which drink up extra stain. Flat, smooth boards need little or none.
Can I use the leftover stain later?
Yes, if the tin is sealed well and kept from freezing. Stir it thoroughly before reuse — the pigment settles to the bottom over time.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.