← All tools/Tools/Home & DIY/Wall Stud Calculator
Wall Stud Calculator
How many studs your framed wall needs — spacing, doors, windows and waste included.
Plate lumber is the bottom plate plus a doubled top plate — 3 lengths of the wall in total. Stud length is the wall height.
Total studs to buy
How the number is worked out
How it works
Field studs = floor(wall length in inches ÷ spacing) + 1. Corner studs = corners × 2. Opening studs = (doors + windows) × 4 — a king and a jack stud each side. Subtotal = field + corner + opening studs. Total studs = ceil(subtotal × (1 + waste ÷ 100)). Plate lumber = wall length × 3 lin ft (bottom plate + doubled top plate).
Worked example: a 20 ft wall at 16 in spacing needs floor(240 ÷ 16) + 1 = 16 field studs. One door and one window add (1 + 1) × 4 = 8 opening studs, for 24 before waste. With 10% waste, 24 × 1.10 = 26.4, so buy 27 studs. Plates: 20 × 3 = 60 lin ft.
Frequently asked questions
What spacing should I use — 12, 16 or 24 inches?
16 in on centre is the standard for most walls and suits plasterboard sheets, which are 48 in wide. Use 12 in for tiled or heavy walls, and 24 in only for light, non-load-bearing partitions.
Why does each door and window add 4 studs?
Each opening needs a king stud and a jack stud on both sides to carry the header above it. That is 2 studs per side, or 4 per opening.
What is plate lumber?
The horizontal lumber top and bottom: one bottom plate and a doubled top plate, so 3 lengths of the wall in total. A 20 ft wall needs 60 lin ft of plate lumber.
How long should the studs be?
The wall height — 8 ft studs for an 8 ft wall. Buy pre-cut studs if your wall height matches a standard length; otherwise cut them from longer stock.
Why add waste to studs?
Lumber is never perfect — allow 10% for bowed or twisted pieces, bad cuts and the odd split. It is far cheaper than a second trip to the yard.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.