← All tools/Tools/Home & DIY/Countertop Calculator

Countertop Calculator

How much countertop to order — run, island, backsplash and waste included.

ft
in
ft
in
in
%

Areas are worked out in square feet. Order area adds the waste allowance on top of the total.

Area to order

—

Total area
To order
How the number is worked out

How it works

Run area = run length (ft) × run depth (in) ÷ 12.
Island area = island length (ft) × island depth (in) ÷ 12.
Backsplash area = run length (ft) × backsplash height (in) ÷ 12.
Total area = run + island + backsplash.
Area to order = total area × (1 + waste ÷ 100).

Worked example: a 10 ft run that is 25 in deep is 10 × 25 ÷ 12 = 20.83 sq ft. With no island or backsplash and 10% waste, order 20.83 × 1.10 = 22.92 sq ft.

Frequently asked questions

Why is the depth divided by 12?

The length is in feet and the depth is in inches, so dividing the depth by 12 turns it into feet. Then feet × feet gives square feet.

How much waste should I allow?

10% is a good default for a straight run. Allow 15% or more for an L-shaped run, a stone with a strong pattern, or lots of cut-outs for sinks and hobs.

Do I count the backsplash separately?

Yes, if it is the same material as the countertop. The backsplash area is the run length times the backsplash height, added to the run and island areas.

What about the sink cut-out?

The sink cut-out is small compared with the waste allowance, so it is not subtracted. The waste allowance covers it and the offcuts.

Should I measure in feet or inches?

Either — just keep the units as labelled. Lengths are in feet and depths in inches, which matches how countertops are usually sold and cut.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.