← All tools/Tools/Home & DIY/Baseboard Calculator
Baseboard Calculator
How many baseboard pieces to buy — doors and cutting waste taken off and added on.
A rectangular room has 4 inside corners. Door openings are subtracted from the perimeter before waste is added.
Pieces to buy
How the number is worked out
How it works
Perimeter = 2 × (room length + room width). Net length = perimeter − (number of doors × door width). Total to buy = net length × (1 + waste ÷ 100). Pieces = ceil(total to buy ÷ piece length). A rectangular room has 4 inside corners.
Worked example: a 12 × 14 ft room has a perimeter of 2 × (12 + 14) = 52 ft. Two 3 ft doors take off 6 ft, leaving 46 ft. With 10% waste that is 46 × 1.10 = 50.6 ft, so 50.6 ÷ 12 = 5 pieces (60 ft bought).
Frequently asked questions
Why are doors subtracted?
Baseboard does not run across a doorway, so each door opening is taken off the perimeter before you work out how much to buy.
How much waste should I allow?
10% is a good default for a rectangular room. Allow more if the room has lots of corners, short runs, or you are new to cutting mitres.
What if my room is not rectangular?
Measure the length of every wall, add them up, and use that total instead of the perimeter. The rest of the maths — doors, waste and pieces — works the same way.
Should I buy one extra piece?
The waste allowance already covers offcuts and one or two bad cuts. If your supplier sells pieces singly, rounding up to the next whole piece is the same thing.
How do I handle inside corners?
A rectangular room has 4 inside corners. Each one needs a mitred or coped joint, so plan your cuts before you start and keep the longest pieces for the longest walls.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.