← All blog posts

How to calculate cone volume step by step

WhiteUI · A plain-English guide to the Cone Volume Calculator

A cone’s volume needs just two measurements: the radius of its round base and its height, measured straight from the centre of the base to the tip. If you have those two numbers, the answer is four short steps away.

The four steps

First, square the radius — multiply it by itself. Second, multiply that by π (3.14159). That gives you the area of the circular base. Third, multiply by the height. That gives the volume of a cylinder with the same base and height. Fourth, divide by 3, because a cone holds exactly one third of that cylinder.

Worked example

Take a cone with radius 3 cm and height 4 cm.

Radius squared:  3² = 9
Base area:       π × 9 = 28.27
Times height:    28.27 × 4 = 113.10
Divide by 3:     113.10 ÷ 3 = 37.70
Volume = 37.70 cubic cm

The same cone has a slant height of 5 cm — the sloping side, found from √(3² + 4²) = √25 = 5 — and a curved surface area of 47.12 square cm (π × 3 × 5). You do not need either number for the volume, but they are useful if you are wrapping or painting the cone.

h = 4 cmr = 3 cm

A cone with radius 3 cm and height 4 cm. Its volume is 37.70 cubic cm.

The common mistake

The usual error is using the diameter where the radius belongs. If the base is 6 cm across, the radius is 3 cm, not 6 cm. Put 6 cm in as the radius and the answer comes out as 150.80 cubic cm — four times too big, because the radius is squared and 6² is four times 3². Halve the width across the base first, then start the four steps.

Four steps or one shortcut: which to use

The four steps in this guide — square, multiply by π, multiply by height, divide by 3 — are the safe route, and they are the route to use whenever the answer matters. But once you know the pattern, a familiar cone can be done in one line: the cone above has a radius of 3 cm and a height of 4 cm, so its volume is (1/3) × π × 9 × 4 = 12π = 37.70 cubic cm. Recognising 12π at a glance is the reward for doing the four steps a few times.

A second cone shows the shortcut working: radius 9 cm, height 12 cm gives (1/3) × π × 81 × 12 = 324π = 1,017.88 cubic cm. The four steps give the same number — 81, then 254.47, then 3,053.63, then ÷ 3 — but the shortcut gets there in one multiplication. Use the steps to learn and to check; use the shortcut once the pattern is familiar.

The mistake the steps are designed to catch

The four steps exist because the two commonest errors both happen at the start: using the diameter instead of the radius, and using the slant height instead of the height. The cone above is 6 cm across with a slant height of 5 cm; typing 6 in as the radius gives 150.80 cubic cm — four times too big — and typing 5 in as the height gives (1/3) × π × 9 × 5 = 47.12 cubic cm instead of 37.70.

Step one of the four steps is the guard against the first error: halve the width across the base and write the radius down before squaring it. Step three guards against the second: the height is the straight line from the centre of the base to the tip, and for this cone it is 4 cm, not the 5 cm sloping side. Follow the steps in order and both errors have nowhere to hide.

Frequently asked questions

What two measurements do I need?

The radius of the base and the vertical height from the base to the tip. If you only know the width across the base, halve it — that is the diameter, and the radius is half of it.

Why do I divide by 3 at the end?

A cone with the same base and height as a cylinder holds exactly one third of the cylinder’s volume. The first three steps work out the cylinder; dividing by 3 leaves the cone.

What units is the answer in?

Cubic units of whatever you measured in. Radius and height in cm give cubic cm; in metres they give cubic metres. Keep both measurements in the same unit before you start.

More guides on the Cone Volume Calculator

Try it yourself

Volume, slant height and lateral area from radius and height — free, in your browser.

Open the Cone Volume Calculator