Cone volume FAQ: the questions everyone asks
These are the questions people ask most often about cone volume, answered in one place. The worked example running through this page uses a cone with radius 7 cm and height 10 cm: base area π × 49 = 153.94, times height 10 gives 1,539.38, divided by 3 gives a volume of 513.13 cubic cm — about 0.51 litres.
Radius, diameter and height
The radius is half the width across the base. If you measured 14 cm across, the radius is 7 cm. The height is the straight line from the centre of the base to the tip — 10 cm here — and the slant height, the line down the slope, is √(7² + 10²) = 12.21 cm. Only the radius and the straight height go into the volume formula; the slant height is for surface area, not volume.
A cone with radius 7 cm and height 10 cm. Its volume is 513.13 cubic cm.
Units and litres
Measure in cm and the answer is in cubic cm. A litre is 1,000 cubic cm, so 513.13 cubic cm is 0.51 litres — a little over half a litre of water. Measure in metres and the answer is in cubic metres; measure in inches and it is in cubic inches. Whatever the unit, keep it the same for radius and height, and convert the answer at the end, not the inputs in the middle.
The common mistake
The question behind most wrong answers is “which height?” People measure the slope because it is the edge they can see and put a finger on. The slope is always longer than the true height, so the volume comes out too big — here, using 12.21 cm as the height would give 626.53 cubic cm instead of 513.13. Measure through the middle, base to tip, and check the answer against the cylinder: a third of 1,539.38 is 513.13.
Frequently asked questions
What is the difference between radius and diameter?
The diameter is the full width across the base; the radius is half of it, from the centre to the edge. The formula needs the radius, so halve any diameter measurement first.
What is slant height, and do I need it?
Slant height is the distance down the sloping side from tip to base edge — 12.21 cm in the example above. You need it for surface area, but not for volume, which uses only radius and vertical height.
How do I turn cubic cm into litres?
Divide by 1,000. One litre is 1,000 cubic cm, so 513.13 cubic cm is 0.51 litres. For cubic metres, one cubic metre is 1,000 litres.
What is the volume if the radius is zero?
Zero. A radius of zero means there is no base at all, so the cone has no volume. The same goes for a height of zero — a flat disc holds nothing.
More guides on the Cone Volume Calculator
- How to calculate cone volume step by step
- Cone volume formula explained with an example
- Cone volume: a worked example from start to finish
- Cone volume mistakes most people make
- Cone volume for beginners: no maths background needed
- Cone volume on mobile: doing it without an app
- Cone volume shortcut method for quick answers
- Cone volume with units: converting inputs correctly
- Cone volume history: where the formula comes from
Volume, slant height and lateral area from radius and height — free, in your browser.