Cone volume: a worked example from start to finish
Here is a single cone worked through from the measurements to a checked answer, so you can follow the same route with your own numbers. The cone is a paper funnel: radius 6 cm, height 8 cm.
Start with the measurements
Measure across the open end of the funnel and halve it: the opening is 12 cm across, so the radius r is 6 cm. Measure the height straight down the middle, from the opening to the tip: h is 8 cm. Both numbers are in cm, so the answer will come out in cubic cm.
Do the arithmetic in order
Radius squared: 6² = 36 Base area: π × 36 = 113.10 Times height: 113.10 × 8 = 904.78 Divide by 3: 904.78 ÷ 3 = 301.59 Volume = 301.59 cubic cm
The slant height is √(6² + 8²) = √100 = 10 cm, another neat triangle (6-8-10). The curved surface area is π × 6 × 10 = 188.50 square cm.
A cone with radius 6 cm and height 8 cm. Its volume is 301.59 cubic cm.
Check the answer makes sense
Two checks catch most slips. First, the cone must be exactly a third of the cylinder with the same base and height — and 904.78 ÷ 3 is indeed 301.59. Second, compare with a smaller cone you already know: a cone with radius 3 cm and height 4 cm holds 37.70 cubic cm. This cone is twice as wide and twice as tall, so it should hold 2³ = 8 times as much — and 37.70 × 8 = 301.60, which matches to rounding. If either check fails, re-do the squaring step first; that is where most errors hide.
The common mistake
The most frequent slip here is forgetting to square the radius — using 6 instead of 36. That gives (1/3) × π × 6 × 8 = 50.27 cubic cm, six times too small. Always square the radius before touching π.
Cone or cylinder: what the third really means
The cone in the worked example holds 301.59 cubic cm, and the cylinder with the same base and height holds 904.78 cubic cm — exactly three times as much. That ratio is the whole story of the formula: a cone is a cylinder that has been tapered to a point, and the taper removes two thirds of the space. If you are filling a cone-shaped funnel from a cylindrical jug, the jug must hold three funnel-fulls, not one.
A second cone makes the ratio concrete. A cone with a radius of 5 cm and a height of 9 cm has a volume of (1/3) × π × 25 × 9 = 235.62 cubic cm, and its matching cylinder holds 706.86 cubic cm — again three times as much. The ratio never changes, whatever the size: double the radius and the volume grows four times, but the cone is still a third of its cylinder.
What to check before you trust the answer
The check that catches the most errors is the diameter. The funnel above is 12 cm across, so its radius is 6 cm — but typing 12 in as the radius gives (1/3) × π × 144 × 8 = 1,206.37 cubic cm, four times the right answer. Halve the width across the opening first, and write the radius down before you start.
The second check is the cylinder test: multiply your cone answer by 3 and see whether it equals π × r² × h. Here 301.59 × 3 = 904.77, which matches the cylinder volume of 904.78 to rounding. If the two do not match, the squaring step is the first place to look — using 6 instead of 36 gives 50.27 cubic cm, six times too small.
Frequently asked questions
How do I measure the radius of a real cone?
Measure straight across the widest open end and halve it. For a solid cone, measure the diameter of the round base the same way. A ruler across the middle is enough; you do not need the circumference.
What if I only know the diameter?
Halve it. A 12 cm diameter means a 6 cm radius. Never put the diameter straight into the formula — it gets squared, so the error is multiplied by four.
Should I round to 301.59 or 302?
Either is fine for most jobs. Keep two decimal places while you are working, and round to a whole number only at the end, so rounding does not creep into the next step.
More guides on the Cone Volume Calculator
- How to calculate cone volume step by step
- Cone volume formula explained with an example
- Cone volume mistakes most people make
- Cone volume for beginners: no maths background needed
- Cone volume FAQ: the questions everyone asks
- Cone volume on mobile: doing it without an app
- Cone volume shortcut method for quick answers
- Cone volume with units: converting inputs correctly
- Cone volume history: where the formula comes from
Volume, slant height and lateral area from radius and height — free, in your browser.