← All tools/Calculators/Geometry/Cone Volume Calculator

Cone Volume Calculator

Volume of a cone from radius and height, plus slant height.

Volume

—

Volume
Lateral surface area

How it works

Slant height s = √(r² + h²)
Volume V = (1/3) × π × r² × h
Lateral area = π × r × s

Three formulas share the same two inputs, radius r and height h. Slant height s is the hypotenuse of the radius-height triangle, so s = √(r² + h²) by Pythagoras. Volume is one third of the cylinder with the same base and height: V = (1/3) × π × r² × h, which is why a cone holds exactly a third of what the matching cylinder holds. Lateral area — the curved side only, without the base — is π × r × s. Units follow the inputs: centimetres in give cubic centimetres for volume and square centimetres for area. The formulas are for a right circular cone, with the tip directly above the centre of the base.

Worked example: radius 3 and height 4 give slant height √(9 + 16) = 5.00, volume (1/3) × π × 9 × 4 = 37.70 and lateral area π × 3 × 5 = 47.12.

Second worked example: a paper birthday cap has radius 5 cm and height 12 cm. Slant height is √(5² + 12²) = √(25 + 144) = √169 = 13 cm — the familiar 5-12-13 triangle. Volume is (1/3) × π × 25 × 12 = 314.16 cm³, which is how much the cap could hold if it were filled. Lateral area is π × 5 × 13 = 204.20 cm², which is the area of paper the curved side needs, before any overlap for joining.

Frequently asked questions

What is slant height?

The distance from the tip of the cone down the sloping side to the edge of the base — the hypotenuse of the radius-height triangle. It is longer than the vertical height, because the sloping side is the longest side of that triangle. You need it for lateral area, but not for volume, which uses only radius and height.

Is a cone a third of a cylinder?

Yes — a cone with the same base and height as a cylinder has exactly one third of the cylinder’s volume. Fill the cone with sand three times and you fill the cylinder once. This is also why the volume formula carries the 1/3: it is the cylinder’s volume, πr²h, divided by three.

Does lateral area include the base?

No — lateral area is the curved side only. Add πr² for the base to get total surface area. If the cone is open, like a birthday cap or a funnel, lateral area is the number you want, because there is no base to cover. If it is closed, add the base circle separately.

What if I know the diameter instead of the radius?

Halve it first: radius = diameter ÷ 2, then use the radius here. A cone 10 cm across has a radius of 5 cm, and entering 10 as the radius would give four times the true volume, because the radius is squared in the formula. Check whether your measurement is across the whole base or from the centre.

Can I use this for a frustum?

No — a frustum is a cone with the tip cut off, so it has two radii and a different formula. This calculator is for a full cone with a single point at the top. If your shape is a bucket or a lampshade with a flat top, use a frustum volume formula with both the top and bottom radii.

What the result means

Volume and lateral area answer different questions, so read the right one for your job. Volume tells you capacity — how much sand, grain or water the cone holds — and it is the number for a traffic cone filled with concrete or a funnel holding liquid. Lateral area tells you material — how much paper, sheet metal or paint the curved side needs — and it is the number for making a birthday cap or covering a conical roof.

Check the units before you trust either number. Radius and height in centimetres give volume in cubic centimetres and area in square centimetres, and 1,000 cubic centimetres is a litre. A cone with volume 314.16 cm³ holds about 0.31 litres, not 314 litres — the number is only meaningful with its unit attached.

More tools

Cone Volume Calculator guides

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.