How to calculate carpet step by step
Working out how much carpet to buy is three short multiplications, done in the right order. First the floor area, then the waste allowance, then the length off the roll. Each step feeds the next, so a mistake early on carries through — which is why measuring carefully matters more than calculating quickly.
The steps in order
Room area = length × width Carpet area = room area × (1 + waste%) Length to buy = carpet area ÷ roll width
- Step 1: measure the room’s length and width in the same unit, and multiply them for the room area.
- Step 2: add the waste allowance — 10% for most rectangular rooms — by multiplying by 1.10.
- Step 3: divide the carpet area by the roll width to get the length to order.
Worked example: a 5 m by 4 m room is 20 m². With a 10% waste allowance you need 20 × 1.10 = 22 m². From a 4 m wide roll, that is 22 ÷ 4 = 5.50 m of carpet to order. A second room, 6 m by 3.5 m, is 21 m², needs 23.1 m² with 10% waste, and takes 23.1 ÷ 3 = 7.70 m from a 3 m wide roll.
Measure each wall at its longest point, including alcoves and door recesses, and measure twice before ordering. Carpet is cut to order and rarely returnable, so ten careful minutes with a tape measure saves a costly second trip.
Frequently asked questions
Why add a waste allowance at all?
Because cuts, pattern matching and doorways use more carpet than the bare floor area. Ten percent covers most rectangular rooms; an irregular room or a patterned carpet may need more.
Does a narrower roll change how much carpet I need?
No, only the length to order. The area stays the same, but a narrower roll means a longer length off the roll to cover the same floor.
Should I round up when ordering?
Yes. Order the next sensible length above the calculated figure. Carpet is sold by the metre, and running short mid-room is far worse than a small offcut.
More guides on the Carpet Calculator
- Carpet formula explained with an example
- Carpet: a worked example from start to finish
- Carpet mistakes most people make
- Carpet for beginners: no maths background needed
- Carpet FAQ: the questions everyone asks
- Carpet on mobile: doing it without an app
- Carpet shortcut method for quick answers
- Carpet with units: converting inputs correctly
- Carpet history: where the formula comes from
Enter your room size, waste allowance and roll width to see how much carpet to order.