Carpet history: where the formula comes from
The carpet formula is not a modern invention. It is the area of a rectangle — length times width — combined with two facts of the carpet trade that are as old as fitted carpets themselves: cutting wastes material, and carpet is sold off a roll of fixed width.
Rectangular area goes back to the earliest geometry, but the waste allowance is a tradesman’s rule of thumb refined over generations of fitting. Carpet layers learned that a room’s bare area is never the amount that leaves the roll: seams must be placed, patterns matched, and doorways and alcoves cut around. Ten percent became the standard allowance for a plain rectangular room because it covers those losses without piling up expensive surplus.
The roll-width division is the newest part of the method, arriving with machine-made broadloom carpet in wide rolls. Before that, carpet came in narrow strips that were sewn together, and the calculation was about strips, not lengths. The modern form — area, plus waste, divided by roll width — is simply the old trade knowledge restated for broadloom.
The worked example shows the method unchanged in spirit: a 5 m by 4 m room is 20 m², 22 m² with waste, and 5.50 m from a 4 m roll. The tools changed; the arithmetic of covering a floor did not.
Frequently asked questions
Why add a waste allowance at all?
Because cuts, pattern matching and doorways use more carpet than the bare floor area. Ten percent covers most rectangular rooms; an irregular room or a patterned carpet may need more.
Does a narrower roll change how much carpet I need?
No, only the length to order. The area stays the same, but a narrower roll means a longer length off the roll to cover the same floor.
Should I round up when ordering?
Yes. Order the next sensible length above the calculated figure. Carpet is sold by the metre, and running short mid-room is far worse than a small offcut.
More guides on the Carpet Calculator
- How to calculate carpet step by step
- Carpet formula explained with an example
- Carpet: a worked example from start to finish
- Carpet mistakes most people make
- Carpet for beginners: no maths background needed
- Carpet FAQ: the questions everyone asks
- Carpet on mobile: doing it without an app
- Carpet shortcut method for quick answers
- Carpet with units: converting inputs correctly
Enter your room size, waste allowance and roll width to see how much carpet to order.