← All blog posts

Carpet: a worked example from start to finish

WhiteUI · A plain-English guide to carpet

A bedroom measures 5 m long and 4 m wide, the carpet comes on a 4 m wide roll, and the room is a plain rectangle with no pattern to match. That is the simplest case, and it is the right one to learn the method on.

Room area first: 5 × 4 = 20 m². Waste next: 10% is the standard allowance for a rectangular room, so 20 × 1.10 = 22 m² of carpet. Length last: 22 ÷ 4 = 5.50 m off the roll. The order to the shop is 5.50 m of the 4 m wide carpet, and it is worth rounding up slightly rather than ordering exactly 5.50 m.

Now a trickier room: 6 m by 3.5 m, with a 3 m wide roll. Room area is 6 × 3.5 = 21 m². With 10% waste that becomes 21 × 1.10 = 23.1 m². Length is 23.1 ÷ 3 = 7.70 m. Notice how the narrower roll pushes the length up even though the room is barely bigger — width matters as much as area.

If the second room had a patterned carpet or an L-shaped floor, 15% waste would be the safer allowance: 21 × 1.15 = 24.15 m², or 8.05 m from the same 3 m roll. Waste is the one input where a generous guess costs little and a tight guess costs a second order.

Frequently asked questions

Why add a waste allowance at all?

Because cuts, pattern matching and doorways use more carpet than the bare floor area. Ten percent covers most rectangular rooms; an irregular room or a patterned carpet may need more.

Does a narrower roll change how much carpet I need?

No, only the length to order. The area stays the same, but a narrower roll means a longer length off the roll to cover the same floor.

Should I round up when ordering?

Yes. Order the next sensible length above the calculated figure. Carpet is sold by the metre, and running short mid-room is far worse than a small offcut.

More guides on the Carpet Calculator

Try it yourself

Enter your room size, waste allowance and roll width to see how much carpet to order.

Open the Carpet Calculator