← All blog posts

Triangle area when inputs are missing or estimated

WhiteUI · A plain-English guide to triangle area calculator

Sometimes the numbers you need are not the numbers you have. A triangle drawn on a plan might give you three side lengths and no height, or a height you had to pace out roughly in a garden. Triangle area still works in both cases — you just need a different route to the answer, and an honest idea of how far out it could be.

Three sides, no height: Heron’s formula

When you know all three sides, Heron’s formula finds the area without a height at all. First halve the perimeter to get s, then multiply s by (s − a), (s − b) and (s − c), and take the square root. For sides of 5 cm, 6 cm and 7 cm: s = (5 + 6 + 7) ÷ 2 = 9, and the area is √(9 × 4 × 3 × 2) = √216 ≈ 14.70 cm².

Heron’s formula is exact, not an approximation — the only rounding is at the end, when √216 becomes 14.70. It is the right tool whenever a height cannot be measured directly, such as a triangular plot whose corners you can reach but whose middle you cannot.

When the height is only an estimate

Suppose you pace out a garden triangle: the base is a solid 10 m, but the height is roughly 7 m — it could be 6 m or 8 m. Work out the range instead of pretending the estimate is exact. At 6 m the area is ½ × 10 × 6 = 30 m²; at 8 m it is ½ × 10 × 8 = 40 m². So the area is about 35 m², give or take 5.

That range is the honest answer, and it is usually enough. If you are ordering turf, order for the top of the range — 40 m² — so you do not run short. If two different estimates of the height give areas far apart, the measurement is the problem, not the formula: go back and measure the height properly before spending money on the result.

Worked example

Heron: s = (5 + 6 + 7) ÷ 2 = 9
Area = √(9 × 4 × 3 × 2) = √216 ≈ 14.70 cm²

Sides 5 cm, 6 cm and 7 cm. Half the perimeter is 9, so the area is the square root of 9 × 4 × 3 × 2 = 216, which is about 14.70 cm².

At a glance

base 10 mheight ≈ 7 mArea = ≈ 35 m²

A garden triangle with a base of 10 m and a height estimated at about 7 m. Its area is about 35 m².

Frequently asked questions

How do I find the area if I only know the three sides?

Use Heron’s formula. Halve the perimeter to get s, then take the square root of s × (s − a) × (s − b) × (s − c). For sides 5, 6 and 7 cm, the area is about 14.70 cm².

What if I only know two sides and no height?

You need one more piece of information — the height, the third side, or an angle. Two sides alone do not fix a triangle’s shape, so they cannot fix its area.

How far out can an estimated height put the answer?

The area is out by the same percentage as the height. If the height could be 10% off, so can the area. Work out the area at both ends of your estimate to see the range.

Should I round an estimated answer?

Yes — an estimate should not pretend to be precise. If the height was a rough pace-out, give the area to two figures at most, or as a range like 30–40 m².

More guides on the Triangle Area Calculator

Try it yourself

Enter the base and height of a triangle to see its area.

Open the Triangle Area Calculator