Triangle area: a worked example from start to finish
Here is one triangle area calculation from the first number to the last, with nothing skipped. Follow it with a pencil, then check the calculator agrees.
The formula is: Area = (base × height) ÷ 2. The height must be the perpendicular height — the straight line from the base to the opposite corner at a right angle — not the length of a sloping side. If you know three sides instead, Heron’s formula gives the area from the sides alone: with s = (a + b + c) ÷ 2, area = √(s × (s − a) × (s − b) × (s − c)).
Start with the worked example: Base 10 and height 6 give (10 × 6) ÷ 2 = 60 ÷ 2 = 30 square units.
A second example: base 8 and height 5 give (8 × 5) ÷ 2 = 20. A third check, using Heron’s formula for sides 3, 4 and 5: s = (3 + 4 + 5) ÷ 2 = 6, and area = √(6 × 3 × 2 × 1) = √36 = 6.
Now work the same example backwards as a check: does the answer, fed back through the formula, return the inputs you started with? If it does, you have understood the method, not just copied an answer — and your own numbers will work the same way.
The same answer two ways: base × height or Heron’s formula
The worked example above uses base × height, but the same triangle can be checked with Heron’s formula, which needs only the three sides. Take a triangle with sides 5, 12 and 13: half the perimeter is s = (5 + 12 + 13) ÷ 2 = 15, and the area is √(15 × 10 × 3 × 2) = √900 = 30. Now check it the other way: this is a right-angled triangle, with legs 5 and 12, so ½ × 5 × 12 = 30 as well. Two routes, one answer — that agreement is the strongest check you have.
Heron’s formula is the slower route, so use it as the check, not the first attempt. Base × height needs two measurements and one halving; Heron needs three sides, a semi-perimeter and four multiplications under a square root. When the two answers disagree, the base × height figure is usually the one to trust first — re-measure the height, because a sloping side mistaken for the height is the usual cause.
What to check before you trust the answer
The check that catches the most errors takes five seconds: the height can never be longer than the sloping side beside it. In a right-angled triangle with legs 6 and 8, the sloping side is 10, and the area is ½ × 6 × 8 = 24. If someone uses the sloping side as the height, they get ½ × 6 × 10 = 30 — a quarter too big. Whenever your “height” is longer than every side of the triangle, stop: it is not the height.
The second check is the units. An answer in square centimetres from centimetre inputs is consistent; if the base was measured in metres and the height in centimetres, convert first. A base of 1.4 m and a height of 90 cm is 140 cm and 90 cm, giving ½ × 140 × 90 = 6,300 cm², or 0.63 m². Mixing the two without converting gives 63 — a hundred times too small.
Frequently asked questions
Why work through an example by hand?
Because a hand-worked example gives you a number you trust. Once you have one, you can test the calculator against it and spot any input slip at once.
Should the calculator match my hand calculation exactly?
Yes, apart from rounding to two decimal places. A larger gap means an input differs.
What if my result looks wrong?
Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.
More guides on the Triangle Area Calculator
- How to calculate triangle area step by step
- Triangle area formula explained with an example
- Triangle area mistakes most people make
- Triangle area for beginners: no maths background needed
- Triangle area FAQ: the questions everyone asks
- Triangle area on mobile: doing it without an app
- Triangle area shortcut method for quick answers
- Triangle area with units: converting inputs correctly
- Triangle area history: where the formula comes from
Enter the base and height of a triangle to see its area.