← All blog posts

Triangle area with units: converting inputs correctly

WhiteUI · A plain-English guide to triangle area calculator

Most wrong answers here are unit slips, not formula slips. Get the units right and the formula usually takes care of itself.

Keep the base and the height in the same unit: centimetres with centimetres, metres with metres. The area comes out in square units — cm² or m² — and 1 m² = 10,000 cm², so 30,000 cm² is 3 m², not 30,000 of anything useful. Convert before multiplying, never after, or the conversion factor itself gets squared by mistake.

The formula is: Area = (base × height) ÷ 2. The height must be the perpendicular height — the straight line from the base to the opposite corner at a right angle — not the length of a sloping side. If you know three sides instead, Heron’s formula gives the area from the sides alone: with s = (a + b + c) ÷ 2, area = √(s × (s − a) × (s − b) × (s − c)).

Worked example, with units shown: Base 10 and height 6 give (10 × 6) ÷ 2 = 60 ÷ 2 = 30 square units.

A second example: base 8 and height 5 give (8 × 5) ÷ 2 = 20. A third check, using Heron’s formula for sides 3, 4 and 5: s = (3 + 4 + 5) ÷ 2 = 6, and area = √(6 × 3 × 2 × 1) = √36 = 6.

Before trusting any answer, read its unit back: does it say what you expected — square units for an area, a length for a circumference, rupees for a maturity? If the unit looks wrong, an input unit is wrong too.

Frequently asked questions

Which unit should the answer be in?

The unit that matches your inputs: the same length unit for a circumference, square units for an area, rupees for money. If the answer’s unit surprises you, an input unit is wrong.

How do I convert between units?

Convert before calculating, not after. Convert every input to one unit first, then run the formula once.

What if my result looks wrong?

Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.

More guides on the Triangle Area Calculator

Try it yourself

Enter the base and height of a triangle to see its area.

Open the Triangle Area Calculator