← All blog posts

How to calculate triangle area step by step

WhiteUI · A plain-English guide to triangle area calculator

Work it in this order, and check each step before moving to the next. The order matters because each step feeds the one after it.

First, gather the inputs the formula names, in the units the calculator expects. Then apply the formula: Area = (base × height) ÷ 2. The height must be the perpendicular height — the straight line from the base to the opposite corner at a right angle — not the length of a sloping side. If you know three sides instead, Heron’s formula gives the area from the sides alone: with s = (a + b + c) ÷ 2, area = √(s × (s − a) × (s − b) × (s − c)).

Worked example, step by step: Base 10 and height 6 give (10 × 6) ÷ 2 = 60 ÷ 2 = 30 square units.

A second example: base 8 and height 5 give (8 × 5) ÷ 2 = 20. A third check, using Heron’s formula for sides 3, 4 and 5: s = (3 + 4 + 5) ÷ 2 = 6, and area = √(6 × 3 × 2 × 1) = √36 = 6.

Now repeat it with your own numbers. Change one input at a time and watch the answer move — that is how you learn what each input actually does, instead of just reading a number off the screen.

Base-and-height or Heron’s formula — which one to use

The calculator offers two routes to the same answer, and the right one depends on what you actually know about the triangle. If you know a base and its perpendicular height, use Area = (base × height) ÷ 2 — it is one multiplication and one division. A triangle with a base of 12 and a height of 7 gives (12 × 7) ÷ 2 = 42 square units, and that is the whole job. If you only know the three sides, use Heron’s formula instead: with s = (a + b + c) ÷ 2, area = √(s × (s − a) × (s − b) × (s − c)). Sides of 5, 5 and 6 give s = 8, and area = √(8 × 3 × 3 × 2) = √144 = 12. Sides of 13, 14 and 15 give s = 21, and area = √(21 × 8 × 7 × 6) = √7,056 = 84. Heron’s formula is the longer route, so do not use it when you already know the height — but it is the only route when the height is the thing you do not have. As a check, both routes must agree on the same triangle: a 3-4-5 triangle has an area of 6 by Heron’s formula, and by base-and-height with base 4 and height 3 it is (4 × 3) ÷ 2 = 6 as well.

What to check before you trust the answer

Three checks catch nearly every wrong triangle area. First, the height must be perpendicular — the straight line from the base to the opposite corner at a right angle. Using a sloping side as the height is the single most common error, and it always makes the area too big. Second, both inputs must be in the same unit before you multiply. A triangle with a base of 120 cm and a height of 80 cm has an area of (120 × 80) ÷ 2 = 4,800 square cm, which is 0.48 square metres — mixing centimetres and metres in the two boxes gives an answer that is wrong by a factor of a hundred. Third, give the answer a sense check against the shape: a triangle fills exactly half of the rectangle built on the same base and height, so a floor triangle 2.4 m wide and 1.5 m high covers (2.4 × 1.5) ÷ 2 = 1.8 square metres — if your answer is bigger than the rectangle it sits inside, the height was not perpendicular. Check the height, check the units, and the formula does the rest.

Frequently asked questions

Where do I start?

Start with the inputs the formula needs, in the order the calculator lists them, then read the headline result and the lines beneath it.

Should the calculator match my hand calculation exactly?

Yes, apart from rounding to two decimal places. A larger gap means an input differs, not that the calculator disagrees.

What if my result looks wrong?

Re-read each field and its unit first. Most wrong results come from a mistyped number or a wrong unit, not from the calculator itself.

More guides on the Triangle Area Calculator

Try it yourself

Enter the base and height of a triangle to see its area.

Open the Triangle Area Calculator