← All blog posts

Molarity vs molality: what's the difference

WhiteUI · A plain-English guide to the Molarity Calculator

Molarity and molality sound almost the same, but they divide by different things. Molarity is moles per litre of solution. Molality is moles per kilogram of solvent. For a dilute solution in water the two numbers are close, and for a concentrated one they are not.

The units give the difference away. Molarity is written M and means mol/L; molality is written m and means mol/kg. One capital letter, one small letter, two different answers.

Bars comparing molarity 0.98 M with molality 1 m for the same salt solution
One mole of salt in 1 kg of water is exactly 1 molal, but the finished solution is about 1.02 litres, so its molarity is about 0.98 M.

The two definitions side by side

  • Molarity (M) = moles of solute ÷ litres of solution. The denominator is the finished solution, measured as a volume, and it changes with temperature because liquids expand and contract.
  • Molality (m) = moles of solute ÷ kilograms of solvent. The denominator is only the solvent — the water, or whatever the solute is dissolved in — measured as a mass. It does not change with temperature, because a kilogram stays a kilogram.
  • Same numerator, different denominator. Both count the same moles of solute on top. What differs is what sits underneath the line.

Worked example: the same solution, two numbers

Dissolve 58.44 g of table salt — exactly 1 mole — in exactly 1 kg of water. The molality is simple: 1 mol ÷ 1 kg = 1 m. But the molarity is not 1 M, because the finished solution is not 1 litre. The dissolved salt takes up room, so the solution measures about 1.02 litres, and the molarity is 1 ÷ 1.02 = 0.98 M. Same flask, same salt, two different numbers, because one divides by a kilogram of water and the other by litres of solution.

Molality = n ÷ mass of solvent
         = 1 ÷ 1 = 1 m
Molarity = n ÷ volume of solution
         = 1 ÷ 1.02 = 0.98 M

When they are nearly the same

In a dilute solution in water, the two numbers are close enough to confuse. Take 0.1 mol of salt in 1 kg of water: the molality is 0.1 m, and the finished solution is barely more than a litre, so the molarity is about 0.1 M too. The reason is simple: 1 kg of water is about 1 litre, and a small amount of solute barely changes the volume, so the difference stays within a percent or two.

When they differ

Three situations pull them apart. First, concentrated solutions: 2 mol of salt in 1 kg of water is 2 m, but the finished solution is well over a litre, so the molarity is clearly below 2 M. Second, solvents other than water: a kilogram of ethanol is about 1.27 litres, so the same moles give a much lower molarity than molality. Third, temperature: warming a solution expands it, so its molarity falls, while its molality stays the same.

The common mistake

The mistake is using the mass of the whole solution where the mass of the solvent belongs. For the example above, the solution weighs 1 kg of water plus 58.44 g of salt, which is 1.058 kg. Dividing 1 mol by 1.058 kg gives 0.945 m — wrong. Molality always divides by the solvent alone, before the solute was added.

Frequently asked questions

Frequently asked questions

Which one should I use?

Molarity, for most lab work and exam questions — it is what the Molarity Calculator works out. Molality is for work where the temperature changes.

Can I convert between them?

Only if you know the density of the solution, because you need the volume that a kilogram of solvent plus the solute takes up. Without the density, there is no exact conversion.

Is molality ever bigger than molarity?

Yes, whenever a litre of the solution weighs more than a kilogram, which is true of most salt solutions. In the example above, 1 m goes with 0.98 M.

Does the calculator work out molality?

No. The Molarity Calculator works out molarity, moles per litre of solution. For molality, divide the moles by the kilograms of solvent by hand.

More guides on the Molarity Calculator

Try it yourself

Try the Molarity Calculator — free, in your browser.

Open the Molarity Calculator