← All blog posts

Molarity practice questions with answers

WhiteUI · A plain-English guide to the Molarity Calculator

Six questions, six answers, with the working shown for each one. Cover the answers, try each question yourself, then compare. Every question uses M = n ÷ V, and the last two use the formula turned around.

A calculator is allowed for the divisions — the skill is setting the sum up correctly, not long division. The Molarity Calculator will check any answer here.

A flask holding 0.25 moles of solute in 0.5 litres of solution
Question 1: 0.25 mol in 0.5 L gives 0.25 ÷ 0.5 = 0.5 M — half a mole in every litre.

Question 1: a straightforward division

A student dissolves 0.25 mol of salt to make 0.5 L of solution. What is the molarity? Divide the moles by the litres: 0.25 ÷ 0.5 = 0.5 M. Dividing by a half doubles the number, which is why 0.25 becomes 0.5.

Question 2: starting from grams

A student dissolves 5.844 g of table salt and tops the solution up to 500 mL. What is the molarity? First turn grams into moles: 5.844 ÷ 58.44 = 0.1 mol. Then turn millilitres into litres: 500 mL is 0.5 L. Then divide: 0.1 ÷ 0.5 = 0.2 M. The trap is skipping either conversion.

Question 3: a small volume

A student dissolves 0.9 mol of salt to make 300 mL of solution. What is the molarity? Convert the volume first: 300 mL is 0.3 L. Then divide: 0.9 ÷ 0.3 = 3 M.

Question 4: a strong solution

A student dissolves 2 mol of salt to make 0.5 L of solution. What is the molarity? Divide: 2 ÷ 0.5 = 4 M. Table salt dissolves up to about 6 M, so 4 M is strong but possible.

Question 5: working out the mass needed

How many grams of table salt are needed to make 2 L of 0.2 M solution? Turn the formula around: moles = M × V = 0.2 × 2 = 0.4 mol. Then turn moles into grams: 0.4 × 58.44 = 23.38 g. Weigh that much salt, dissolve it, and top the flask up to 2 litres.

Question 6: diluting a stock solution

A student takes 50 mL of 2 M salt solution and adds water until the total volume is 500 mL. What is the new molarity? The moles do not change: 2 × 0.05 = 0.1 mol. The new volume is 0.5 L. Divide: 0.1 ÷ 0.5 = 0.2 M. Diluting tenfold drops the molarity tenfold, from 2 M to 0.2 M.

Worked example: question 1 in full

Here is question 1 with every step written out. List the numbers: n = 0.25 mol, V = 0.5 L. Write the formula: M = n ÷ V. Substitute: M = 0.25 ÷ 0.5. Divide: M = 0.5 M.

M = n ÷ V
M = 0.25 ÷ 0.5
M = 0.5 M

The common mistake

Across all six questions, one mistake causes most wrong answers: skipping a conversion in question 2. Look at the units before you look at the numbers — if a mass is in grams, divide by the molar mass first, and if a volume is in millilitres, divide by 1,000 first. The second most common mistake is question 3’s small volume: 0.9 ÷ 0.3 is 3, not 0.3, because dividing by a number smaller than one makes the answer bigger.

Frequently asked questions

Frequently asked questions

How should I mark my own answers?

Check the number and the unit. Both must match: 0.5 M, not 0.5, and not 0.5 mol — the unit M means mol/L.

What if my answer differs slightly from yours?

A small difference from rounding is fine — 0.154 and 0.15 are the same answer. A difference in size, like 2 instead of 0.2, means a step went wrong.

Where can I practise more?

Change the numbers in any question above and work it out again. Try 0.3 mol in 0.6 L, which gives 0.5 M, or 11.69 g in 1 L, which gives 0.2 M.

Can the calculator check my answers?

Yes. Enter the moles and litres from the question and compare its answer with yours.

More guides on the Molarity Calculator

Try it yourself

Try the Molarity Calculator — free, in your browser.

Open the Molarity Calculator