← All blog posts

Molarity quick reference table

WhiteUI · A plain-English guide to the Molarity Calculator

Sometimes you do not need a calculation — you need the number, now. This page collects the molarity values people look up most often: how many grams of salt make one litre at each strength, how much stock solution to dilute, and the molarities of everyday liquids from saline drip fluid to seawater. Every row is worked out from M = n ÷ V, and the worked example at the end shows how to check any row by hand.

All masses use the molar mass of table salt, 58.44 g/mol. If you need a value not in a table, the Molarity Calculator gives it in seconds.

Bars showing grams of table salt in 1 litre at 0.1, 0.2, 0.5, 1 and 2 M
A 1 M salt solution needs 58.44 g per litre; a 0.1 M solution needs a tenth of that, 5.84 g.

Grams of table salt for 1 litre

MolaritySalt per litre
0.1 M5.84 g
0.2 M11.69 g
0.5 M29.22 g
1 M58.44 g
2 M116.88 g

Weigh the salt, dissolve it, then top the flask up to exactly 1 litre. A 1 M solution needs 58.44 g per litre; a 0.1 M solution needs a tenth of that, 5.84 g. The mass doubles when the molarity doubles, at the same volume.

Diluting 1 M stock to 100 mL

Target1 M stock needed
0.1 M10 mL
0.2 M20 mL
0.5 M50 mL
1 M100 mL (no dilution)

Take the stock, then add water up to 100 mL. The rule is M₁ × V₁ = M₂ × V₂: for 0.1 M in 100 mL you need 1 × V₁ = 0.1 × 100, so V₁ is 10 mL of stock. Measure the stock first, then top up — never the other way round, or the final volume will be wrong.

Everyday solutions

SolutionMolarity
Saline drip fluid (9 g salt/L)0.154 M
Seawater (about 35 g salt/L)0.6 M
Vinegar (about 5% acetic acid)0.83 M
Stomach acid (hydrochloric acid)about 0.1 M

Saline drip fluid is 9 g of salt per litre, which is 9 ÷ 58.44 = 0.154 M — the same saltiness as human blood, which is why it is safe to drip into a vein. Seawater is about 35 g of salt per litre, or 0.6 M, roughly four times as salty. Vinegar is about 5% acetic acid by mass, around 50 g per litre, and 50 ÷ 60.05 = 0.83 M.

Worked example: checking a table row

Take the 0.5 M row from the first table: 29.22 g of salt per litre. Turn the grams into moles: 29.22 ÷ 58.44 = 0.5 mol. The volume is 1 L, so the molarity is 0.5 ÷ 1 = 0.5 M, which matches the table. Any row can be checked the same way.

M = n ÷ V
n = 29.22 ÷ 58.44 = 0.5 mol
M = 0.5 ÷ 1 = 0.5 M

The common mistake

The mistake with tables is reading grams per litre as molarity. A solution with 58.44 g of salt per litre is 1 M, but a solution with 58.44 g of sugar per litre is only 0.17 M, because a mole of sugar weighs 342.3 g. Grams per litre only equal molarity when the molar mass happens to be 1 g/mol, which it never is. Always divide by the molar mass first.

Frequently asked questions

Frequently asked questions

How much salt do I need for 2 litres of 0.5 M?

Twice the 1-litre amount: 2 × 29.22 g = 58.44 g. The mass scales with both the molarity and the volume.

Can I use this table for other salts?

No. The masses here use the molar mass of table salt, 58.44 g/mol. For potassium chloride, use 74.55 g/mol instead, so 1 M needs 74.55 g per litre.

Why is saline 0.154 M and not a round number?

Because it is made to match blood, which is 9 g of salt per litre. The molarity follows from the mass: 9 ÷ 58.44 = 0.154 M.

Can I use this table instead of the calculator?

For the values listed here, yes. For anything else, enter your own moles and litres into the Molarity Calculator.

More guides on the Molarity Calculator

Try it yourself

Try the Molarity Calculator — free, in your browser.

Open the Molarity Calculator