← All blog posts

Molarity for beginners

WhiteUI · A plain-English guide to the Molarity Calculator

Molarity is how strong a solution is. Think of squash and water: a little squash in a lot of water tastes weak, and a lot of squash in a little water tastes strong. Molarity is the chemist’s way of writing that strength down as a number, so two people in two different labs can make exactly the same solution.

This guide starts from zero. No earlier chemistry is needed, and every number is worked out in full. By the end you will be able to work out the molarity of a salt solution, and you will know what the answer means.

Bars comparing 0.1, 0.2, 0.5 and 1 molar solutions
A 1 M solution is ten times as strong as a 0.1 M solution: it holds ten times as many moles in every litre.

What a mole is

A mole is a chemist’s dozen — a fixed count of particles, 6.022 × 10²³ of them. You never count particles one by one; you weigh them. One mole of table salt weighs 58.44 g, one mole of sugar weighs 342.3 g, and one mole of potassium chloride weighs 74.55 g. The weight differs because the particles differ, but the count is always the same.

What the number means

Molarity is moles per litre, written M. A 1 M solution holds 1 mole of solute in every litre. A 0.5 M solution holds half a mole in every litre — half as strong. A 0.1 M solution holds a tenth of a mole per litre, ten times weaker than 1 M. The number tells you how crowded the solute is, not how much solution you have: a thimble of 1 M salt water and a bucket of it are the same strength.

Worked example: the tool’s own numbers

Open the Molarity Calculator and it already holds a worked example: 2 moles of solute in 4 litres of solution. The formula is M = n ÷ V. Divide the moles by the litres: 2 ÷ 4 = 0.5 M. Each litre of that solution holds half a mole of solute, and the answer on the page matches.

M = n ÷ V
M = 2 ÷ 4
M = 0.5 M

Stronger or weaker

Two things change the strength. Adding more solute to the same volume makes it stronger: 1 mol in 1 L is 1 M, and 2 mol in 1 L is 2 M. Adding more water to the same solute makes it weaker: 1 mol in 1 L is 1 M, but 1 mol in 2 L is 0.5 M. Diluting a solution means adding solvent, and the moles stay the same while the litres grow — so the molarity always falls.

The common mistake

Beginners often think molarity is the mass of solute. It is not. Dissolve 58.44 g of salt in 2 litres of water and the molarity is 0.5 M, not 1 M — because 58.44 g is 1 mole, and 1 mole spread over 2 litres is half a mole per litre. The mass only becomes a molarity after you divide by the molar mass and then by the volume.

Frequently asked questions

Frequently asked questions

Is molarity the same as concentration?

Molarity is one way of writing concentration, the most common one in chemistry. Others are mass per litre and percent, but molarity is the one exam questions and lab recipes use.

What is 1 M in plain words?

One mole of solute in every litre of solution. For table salt that is 58.44 g in every litre.

Do I need chemistry to use the calculator?

No. Enter the moles and the litres, and the calculator gives the molarity. This guide explains what the answer means.

Can molarity be zero?

Yes. Pure water has no solute, so its molarity is 0 M. As soon as you dissolve anything in it, the molarity rises above zero.

More guides on the Molarity Calculator

Try it yourself

Try the Molarity Calculator — free, in your browser.

Open the Molarity Calculator