How to use the Flooring Calculator — step by step
Buying flooring is a boxes question, not a square-metres question. Shops sell laminate and vinyl by the box, and a box covers a fixed area, so the job is to turn your floor area into a whole number of boxes. The Flooring Calculator does that in two inputs: your floor area and the coverage printed on one box.
At a glance
Step 1: measure the floor area
Measure the longest length and the longest width of the room in metres, then multiply them. A room 5 metres long and 4 metres wide is 5 × 4 = 20 m². If the room is L-shaped, use the longest length and the longest width; that slightly overstates the area, which is safer than understating it.
Step 2: type the area into the tool
Type 20 into the floor area box. The tool accepts areas from 0 to 500 m², so a single room, a flat or a whole floor all fit. Leave the number in square metres; do not type feet or inches here, or the answer will be wrong by a large margin.
Step 3: type the coverage per box
Read the coverage on the box you plan to buy and type it in. Many laminate boxes cover 2 m², so type 2. If your box covers 1.5 m², type 1.5 instead. This number matters as much as the room size, because a box that covers less area means more boxes.
Step 4: read the boxes needed
The answer appears at once. For 20 m² at 2 m² per box the tool shows 11 boxes. The maths behind it is 20 × 1.10 = 22 m² with the 10% waste allowance, then 22 ÷ 2 = 11 boxes. The 11 boxes cover 22 m², which is exactly the area plus waste.
Step 5: check the lines underneath
Below the big number the tool shows the area with waste, the calculation and the total coverage. Read them before you order. If the area with waste says 22 m² and the boxes cover 22 m², the numbers agree. If they do not, re-check the coverage you typed.
Worked example
A bedroom measures 4 metres by 3 metres, so the area is 12 m². With boxes covering 2 m² each, the tool works out 12 × 1.10 = 13.2 m², then 13.2 ÷ 2 = 6.6, rounded up to 7 boxes. Those 7 boxes cover 14 m², so you have 0.8 m² spare over the 13.2 m² you need.
The common mistake
People type the room length instead of the area. A room 5 metres long is not 5 m²; at 4 metres wide it is 20 m². Typing 5 as the area would give ceil(5 × 1.10 ÷ 2) = ceil(2.75) = 3 boxes, which is 8 boxes short. Always multiply length by width first.
Frequently asked questions
What two numbers does the Flooring Calculator need?
Your floor area in square metres and the coverage of one box in square metres per box. From those it works out the boxes needed, including 10% waste.
How many boxes do I need for a 20 m² floor?
11 boxes, if each box covers 2 m². The maths is 20 × 1.10 = 22 m², then 22 ÷ 2 = 11 boxes.
Where do I find the coverage per box?
On the box label or the product page, usually written as m² per box or m² per pack. Type that exact number into the tool.
Does the tool include waste?
Yes. It adds 10% to the floor area before dividing by the box coverage, to allow for cuts at edges and around door frames.
More guides on the Flooring Calculator
- Flooring Calculator explained with worked examples
- Flooring Calculator formula — how it actually works
- Flooring Calculator for beginners — start here
- Common mistakes people make with the Flooring Calculator
- Flooring Calculator vs doing it by hand — which is faster?
- flooring calculator — the complete guide
- How to get an accurate result from the Flooring Calculator
- Flooring Calculator for students — with examples
- Flooring Calculator for homeowners and DIYers
Try the Flooring Calculator — free, in your browser.