Flooring Calculator for beginners — start here
If you have never bought flooring before, the only new idea is the box. You do not order square metres; you order boxes, and each box covers a set number of square metres. The Flooring Calculator turns your room into a box count in two steps, and this guide walks through each one slowly.
At a glance
First, measure the room
Take a tape measure and measure the longest wall in metres, then the wall next to it. Multiply the two numbers. A room 5 metres long and 2 metres wide is 5 × 2 = 10 m². Write the answer down. If the room has a bay window or a small alcove, measure the longest length and the longest width and use those; the small overestimate is safer than guessing low.
Second, read the box
Look at the flooring box or its product page for the coverage, written as m² per box. A common figure is 2 m² per box, but some packs cover 1.5 m² or 2.5 m². Different brands cover different areas, so do not guess this number from another product. If you have not chosen a product yet, use 2 m² as a rough figure and re-check once you pick a box.
Try one yourself
Take a 10 m² room with boxes covering 2 m² each. Add 10% waste: 10 × 1.10 = 11 m². Divide by the box coverage: 11 ÷ 2 = 5.5. Round up to 6 boxes. Those 6 boxes cover 12 m², so you have 1 m² spare over the 11 m² you need. Type 10 and 2 into the tool and check that it also says 6 boxes.
What the waste allowance is for
Planks are cut at the edges of the room, around door frames and wherever a plank meets a wall at an angle. Those offcuts cannot be used elsewhere, so the tool adds 10% before dividing. For a 10 m² room that is 1 m² extra; for a 20 m² room it is 2 m² extra. It is not a sales trick, it is the material the cuts consume.
What the tool does not do
The tool does not include underlay, which is sold separately and is usually measured by the same floor area without the waste allowance. It does not count skirting boards, thresholds or adhesive either. It answers the boxes question only, so budget for those extras separately.
The common mistake
Beginners often type the room length instead of the area, or type feet when the tool expects metres. A room 4 metres by 3 metres is 12 m², not 4 m² and not 12 feet. If the answer looks far too small, check that you multiplied length by width and that both measurements are in metres.
Frequently asked questions
I have never bought flooring. Where do I start?
Measure the room in metres, multiply length by width to get the area, then read the coverage per box off the product label and type both numbers into the tool.
How many boxes for a 10 m² room?
6 boxes at 2 m² per box. The maths is 10 × 1.10 = 11 m², then 11 ÷ 2 = 5.5, rounded up to 6.
What does the 10% waste allowance cover?
Planks cut at room edges, around door frames and at angles. Those offcuts cannot be reused, so the tool adds 10% to the area first.
Does the tool include underlay?
No. Underlay is sold separately and is usually measured by the same floor area, without the waste allowance.
More guides on the Flooring Calculator
- How to use the Flooring Calculator — step by step
- Flooring Calculator explained with worked examples
- Flooring Calculator formula — how it actually works
- Common mistakes people make with the Flooring Calculator
- Flooring Calculator vs doing it by hand — which is faster?
- flooring calculator — the complete guide
- How to get an accurate result from the Flooring Calculator
- Flooring Calculator for students — with examples
- Flooring Calculator for homeowners and DIYers
Try the Flooring Calculator — free, in your browser.