← All tools/Tools/Home & DIY/Curtain Fabric Calculator
Curtain Fabric Calculator
How much curtain fabric to buy — panels and metres, from your window size.
Total fabric to buy
Full breakdown
How it works
Fabric width needed = window width × fullness. Panels = ceil(fabric width needed ÷ fabric roll width). Panel length = drop + hem allowance. Total fabric = panels × panel length.
The maths is driven by fullness — how much wider the finished curtain is than the window. A flat curtain with no folds would need exactly the window width, but curtains are gathered, so the fabric width needed is the window width times the fullness: 2× fullness means twice the window width, which gives soft, even folds. Fabric is sold in rolls of a fixed width — 1.37 m is the common narrow width, 2.8 m the wide one — so the number of panels is the fabric width needed divided by the roll width, rounded up, because you cannot buy part of a panel. Each panel runs from the rod to the floor, so its length is the drop plus the hem allowance, which covers the fold at the top for the heading and the fold at the bottom for the hem. Multiplying panels by panel length gives the total metres to buy.
Worked example: a 3 m window at 2× fullness needs 6 m of fabric width. 6 ÷ 1.37 = 4.38, so 5 panels. Each panel is 2.4 + 0.3 = 2.7 m long, so buy 5 × 2.7 = 13.5 m. A 2 m window at 1.5× fullness with a 2.0 m drop and 0.2 m hems needs 3 panels of 2.2 m — 6.6 m in total.
Second worked example: a 4.5 m wide sliding door in a Mumbai living room, with a 2.7 m drop, 2× fullness, standard 1.37 m wide fabric and a 0.3 m hem allowance. The fabric width needed is 4.5 × 2 = 9 m, and 9 ÷ 1.37 = 6.57, so 7 panels. Each panel is 2.7 + 0.3 = 3.0 m long, so buy 7 × 3.0 = 21 m of fabric. At the shop, round that up to 21.5 m to be safe, and add a pattern repeat — typically 0.3 to 0.6 m per panel — if the fabric has a large print.
Common mistakes
The first mistake is measuring the window and buying that much fabric — without fullness the curtain hangs flat, with no folds at all, and looks like a bedsheet. Use 1.5× fullness at the very least, and 2× for the soft folds most people picture. The second is measuring the drop from the wrong point: the drop runs from the curtain rod or track, not from the top of the window frame, and for a rod with rings it starts at the bottom of the ring. Measure twice, because a panel cut short cannot be lengthened.
The third is forgetting the hem allowance on a long drop: 0.3 m sounds generous until you fold a deep bottom hem and a heading, and a curtain that ends 5 cm above the floor looks unfinished. The fourth is buying exactly the calculated metres: shops cut in half metres, fabric widths vary slightly between batches, and a mistake in one panel needs spare fabric.
Frequently asked questions
What does fullness mean?
How much wider the fabric is than the window. 2× fullness means the curtain is twice the window width, giving soft folds; 1.5× is flatter and lets more light through the gaps, while 2.5× is fuller and more luxurious. Sheer curtains often need 2.5× or even 3×, because the fabric is so light that the folds need extra width to look full.
Why do I need more fabric than the window width?
Because curtains gather. A flat 3 m of fabric on a 3 m window would hang straight with no folds at all — fullness is what makes the folds, and the folds are what make a curtain look like a curtain. The gathered fabric also covers the window fully when drawn, without pulling tight at the edges.
What is the hem allowance for?
The extra fabric folded at the top (heading) and bottom (hem) so the edges do not fray and the curtain hangs with some weight. 0.3 m covers a standard heading and hem; add more for a deep bottom hem, which helps a long curtain hang straight, or for a pinch-pleat heading, which takes more fabric at the top.
Should I buy extra fabric?
Yes — round up to the nearest half metre at the shop, and add a little more if the fabric has a pattern to match, so the pattern lines up across panels. A large pattern repeat of 0.6 m can add that much per panel, and without the extra the pattern breaks at the seams. Keep any offcut for tiebacks or a cushion cover.
Does fabric width matter?
Yes. Wider fabric (such as 2.8 m) means fewer panels and fewer seams, which matters on a wide window where seams show. Narrow fabric (1.37 m) needs more panels, and each join is a seam you can see in daylight. Wide fabric also suits sheer curtains, where seams are especially visible. Enter your fabric’s width above.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.