← All tools/Tools/Home & DIY/Caulk Calculator

Caulk Calculator

Measure the joint, pick the bead size, and find out how many tubes to buy before you start.

ft
in
in
%

Tubes to buy

6 tubes

Exact need: 5.43 tubes · Joint volume: 90 cu in

Caulk needed 91%Waste allowance 9%
Joint volume90 cu in
Coverage per tube24.30 ft
Exact tubes4.94 tubes

How it works

Joint volume (cu in) = joint length (ft) × 12 × bead width (in) × bead depth (in).
One 10.1 fl oz tube ≈ 18.2 cu in (1 fl oz = 1.8047 cu in).
Tubes = joint volume ÷ tube volume, then × (1 + waste %), rounded up.

120 ft of joint with a ¼ in × ¼ in bead: volume = 120 × 12 × 0.25 × 0.25 = 90 cu in. 90 ÷ 18.2 = 4.94 tubes; with 10% waste, 4.94 × 1.10 = 5.43 — buy 6 tubes.

Frequently asked questions

What bead size should I use?

A ¼ in bead suits most window and bath joints. Wider gaps need a wider, deeper bead — and a lot more caulk, since volume grows with width times depth.

How much does one tube cover?

A standard 10.1 fl oz tube covers about 24 ft of a ¼ in × ¼ in joint. Halve the bead and the same tube covers roughly four times the length.

Why add a waste allowance?

Beads are never perfectly even, and some caulk stays in the tube and nozzle. 10% covers the usual mess; use 15% on rough or uneven joints.

Can I use a bigger tube?

Yes — pick 28 fl oz for long runs. The maths is the same: the tube holds about 50.5 cu in, so it covers roughly 2.8 times the length of a standard tube.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.