← All tools/Tools/Garden & Outdoor/Pond Pump Size Calculator
Pond Pump Size Calculator
Work out the pump size your pond needs — in gallons per hour — from its size and how fast the water should turn over.
Recommended pump size
Required flow 538.6 GPH · pond volume 897.6 gal
How it works
Pond volume (gal) = length (ft) × width (ft) × average depth (ft) × 7.48. Flow before allowance (GPH) = volume ÷ turnover hours. Allowance = 10% + 2% per foot of head height (head and pipe losses). Required flow (GPH) = flow before allowance × (1 + allowance). Recommended pump = required flow rounded up to the next 50 GPH.
10 ft × 6 ft × 2 ft pond: volume = 120 × 7.48 = 897.6 gal. With a 2-hour turnover, flow = 897.6 ÷ 2 = 448.8 GPH. At 5 ft of head the allowance is 10% + 2% × 5 = 20%, so required flow = 448.8 × 1.20 = 538.6 GPH — choose a pump rated about 550 GPH.
Frequently asked questions
How fast should pond water turn over?
Once every 1–2 hours for a koi pond, once every 2 hours for a garden pond with fish, and once every 4 hours is enough for a wildlife pond with no fish.
What is head height?
The vertical distance the pump must lift water — from the pond surface to the top of a waterfall or filter. More head means more resistance, so the allowance grows with it.
Why add an allowance at all?
Pipes, bends and filters all steal flow, so a pump’s headline rating is measured with no resistance. The allowance covers those losses so the pond still turns over on time.
Should I buy a bigger pump than recommended?
A little bigger is fine if it has a flow control, but a much bigger pump wastes electricity and can overflow a small filter. Match the pump to the filter’s rated flow.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.