← All tools/Tools/Garden & Outdoor/Greenhouse Calculator

Greenhouse Calculator

Find the glazing area and panel count for a greenhouse of any size.

ft
ft
ft
ft
ft
%

Panels to buy

11 panels

Wall glazing216 sq ft
Roof glazing100 sq ft

How it works

Wall area = 2 × (length + width) × wall height
Roof area = floor area × 1.25
Total glazing = wall area + roof area
Panels = ceil(total glazing ÷ panel area × (1 + waste %))

Worked example: a 10 × 8 ft greenhouse with 6 ft walls has 216 sq ft of wall glazing and a 100 sq ft roof, 316 sq ft in total. With 4 × 8 ft panels (32 sq ft each) and 10% waste, 316 ÷ 32 × 1.10 = 10.86, so buy 11 panels.

Frequently asked questions

What size panels should I buy?

The calculator defaults to 4 × 8 ft panels, 32 sq ft each, the most common polycarbonate size. Change the panel length and width to match the sheets you are actually buying.

Why is the roof area bigger than the floor area?

A pitched roof is longer than the flat floor beneath it, so the calculator adds a 25% allowance to the floor area to cover the slope.

How much waste should I allow?

10% is a sensible default for cutting and breakage. Allow 15% if the greenhouse has lots of small panes or an unusual shape.

Does the total include the door and vents?

No. The total covers the full wall and roof area, so the door and vents are already inside the figure. Measure the frame to the outside edges for the most accurate result.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.