← All tools/Tools/Garden & Outdoor/Drip Irrigation Calculator

Drip Irrigation Calculator

Enter your plants, emitters and run time, and see your system’s flow rate and how much water each session uses.

L/h
hours

Water per session

80 L

40 emitters · 160 L/h system flow

0 L100 L200 L per session
Total emitters40
System flow rate160 L/h
Water per session80 L
Water per day80 L

How it works

System flow = emitters × flow per emitter
Water per session = system flow × run time (hours)

20 plants × 2 emitters = 40 emitters. At 4 L/h each, the system flow is 40 × 4 = 160 L/h. A 30-minute run (0.5 h) uses 160 × 0.5 = 80 L per session.

Frequently asked questions

How many emitters does each plant need?

Usually 1–2 for small plants and vegetables, and 2–4 spread around a tree or large shrub so the water reaches the whole root zone.

What if my water supply cannot give 160 L/h?

Split the system into zones and run them one at a time. Two zones of 80 L/h each use the same total water but half the flow at once.

How long should I run the drip?

Long enough to wet the root zone — 30–60 minutes is typical for vegetables. Sandy soil needs shorter, more frequent runs; clay needs longer, slower ones.

Does the calculator include evaporation?

No — it counts the water the emitters deliver. Drip loses very little to evaporation, which is why it suits dry climates.

More tools

Tell us what you think

Loving this tool, or stuck on something? Tell us — it takes a minute.

We’ll only use your name and email to reply if needed. The tool and page are filled in for you.