How to use the Area Converter — step by step
The Area Converter changes an area from one unit to another — square metres to square feet, acres to hectares, square yards to square metres, and so on. It takes three steps, and the answer updates as you type. It does not measure land or draw a plot; it converts a number you already have.
The three steps
- Step 1 — Type the area. Enter the number you want to convert, for example 100. Do not type the unit into the box; the unit is chosen separately.
- Step 2 — Pick the units. Choose the unit you are converting from, then the unit you are converting to. For a flat measured in square metres, pick square metres first and square feet second.
- Step 3 — Read the answer. The big number is the converted area. Change the value or either unit and the answer updates at once, so you can try a second conversion without starting again.
If the answer looks far too big or far too small, the units are the first thing to check. Converting 100 square metres to square feet should give a number above 1,000, because one square metre is more than ten square feet.
Worked example
A flat is listed as 100 square metres. To see it in square feet, enter 100, pick square metres as the “from” unit and square feet as the “to” unit. The converter multiplies by 10.7639, because 1 square metre equals 10.7639 square feet:
100 sq m × 10.7639 = 1,076.39 sq ft
At a glance
The mistake to avoid
Typing the area in the wrong unit. If the flat is 100 square metres and you enter 100 as square feet, the converter will faithfully convert 100 square feet — about 9.29 square metres — and the answer will be wrong by a factor of ten. Read the listing first, then pick the “from” unit to match it.
Frequently asked questions
What do I need to use the Area Converter?
One area and its unit — for example, 100 square metres. Type the number, pick the units, and read the answer.
Can I convert acres to square metres?
Yes. Pick acres as the “from” unit and square metres as the “to” unit. One acre equals 4,046.86 square metres.
Does the converter measure my land?
No. It converts an area you already know from one unit to another. It does not measure land or draw a plot.
Does it store the numbers I type?
No. The maths runs in your browser and nothing is sent anywhere.
More guides on the Area Converter
- Area Converter explained with worked examples
- Area Converter formula — how it actually works
- Area Converter for beginners — start here
- Common mistakes people make with the Area Converter
- Area Converter vs doing it by hand — which is faster?
- area converter — the complete guide
- How to get an accurate result from the Area Converter
- Area Converter for students — with examples
- Area Converter for homeowners and DIYers
Convert an area between square feet, square metres, acres and more — free, in your browser.